|
By bird55 - 11 Years Ago
|
I just hauled home a used 292 truck engine from a 64 F-250 that had a 4 speed.
My question is I would like to use my current 3 speed toploader from my 223 six, to go back into my 64 F100. Will it mate up to the 292 bell?
I haven't tried any fitting yet. Any Advice? Will the input shaft be correct?
Any help would be appreciated. thanks.
I was planning on updating the flywheel clutch setup too.
|
|
By Glen Henderson - 11 Years Ago
|
|
Alan the four speed bell will not bolt to the three speed trans, but if you can't find a three speed housing local let me know. If you will pay shipping, I can fix you up.
|
|
By bird55 - 11 Years Ago
|
Thnka Glenn, I will keep that in mind. So the 4 speed bell is different pattern? What else ight be different.?
I was toldmy six cylinder bell would not bolt up to th 292 either. Right?
|
|
By bird55 - 11 Years Ago
|
|
So what I really should be asking is what would the part # for that bell housing be?
|
|
By John Mummert - 11 Years Ago
|
Alan, this might help. Don't forget if you have 57-60 truck you will need the bellhousing with slave cylinder mount. TAAK 7505-B
| CASTING NUMBER | 6cylinder or Y-Block | 3 SPEED OR 4 SPEED | OKAY FOR CONVERSION | | TAAA-7505-A | 54-55 (I-6) TRUCK | 3 speed | 53-56 and 61-64 trucks | | TAAK-7505 | 54-56 (I-6) TRUCK | 3 speed | won't work 57-60 trucks | | TAAK-7505-B | 57-64 (I-6) TRUCK | 3 speed | Okay all years 6 cylinder Truck | | TAAB-7505 | 54-56 V8 TRUCK | 3 speed | Okay 54-56 and 61-64 Truck | | TAAM-7505A | 57-60 V8 TRUCK | 3 speed | Okay all years Y-Block Truck | | TAAM-7505B | 61-64 V8 TRUCK | 3 speed | Okay all years Y-Block Truck |
|
|
By Glen Henderson - 11 Years Ago
|
|
Alan, I don't have a # handy, but I don't think the 6 cyl will bolt to the V8.But after looking at the chart that John just posted, I may be wrong. If you look at the 6 cyl bell along side the V8 four speed bell, it is easy to see the difference. The center hole is larger on the four speed and the bolt pattern where the trans bolts up is wider apart.
|
|
By bird55 - 11 Years Ago
|
OK thanks guys, it looks like the one I need is TAAM-7505B.
My F100truck is a 64.
Glenn, if you have one let me know. And I will get with you.
John, thanks for your chart!!.
|
|
By Glen Henderson - 11 Years Ago
|
|
Alan, I have one that I just pulled from a 64 pickup, give me your ship to address and I will see what it will cost to ship.
|
|
By bird55 - 11 Years Ago
|
4184 S. Birmingham Place
Tulsa, OK 74105
|
|
By Glen Henderson - 11 Years Ago
|
|
I will get it in the mail in the next day or two.
|
|
By bird55 - 11 Years Ago
|
|
you're awesome Glenn. Send me an email and let me know what I owe you. alanfrakes[AT]frakesdesign.com
|
|
By Glen Henderson - 11 Years Ago
|
|
Alan, it is the mail, tracking # 9114 9010 7574 2371 6988 97 USPC. Postage was $47.15, hope it will work for you.
|
|
By bird55 - 11 Years Ago
|
|
Glenn, email me your address please.
|
|
By bird55 - 11 Years Ago
|
|
Got it Glenn, Thanks It's hardly dirty!
|
|
By Glen Henderson - 11 Years Ago
|
|
I just pulled it out of my old truck, going with a FMX, tired of shifting gears. Hope it works out for you!
|