|
By Ryan New Mexico - 10 Years Ago
|
Hey Guys,
How in the Hades do you get to the Distributor springs? I have it down to the slotted plate that goes over the spring posts. Can I get that plate off to gain better access?
Thanks,
Ryan
|
|
By Y block Billy - 10 Years Ago
|
|
In the center of the distributor cam there is a cotton wick under the rotor button, if you pull that wick out there is a tiny clip which holds the cam on the shaft. If you use a small pick or needle nose pliers you can get it off and pull the cam off then the plate should lift off. Have fun, its a SOB!
|
|