|
By texasmark1 - 10 Years Ago
|
57 Fairlane; 272, original 3 on the tree...
it's getting harder to shift into each gear...
when I shift to reverse, I hear some gear grinding, but it will eventually go into gear...
what's needed? clutch linkage adjustment, new clutch or pressure plate?
has come on gradually.
thanks,Mark
|
|
By charliemccraney - 10 Years Ago
|
Start with the easiest thing, first. Make sure the linkage is in good condition and is adjusted correctly.
|
|
By texasmark1 - 10 Years Ago
|
|
will do; that was going to be my first action...
|
|
By 57RancheroJim - 10 Years Ago
|
A well know issue is the Z bar tearing, I've had a few do it over the years in different 57 cars, also a 66 Mustang.
|
|
By paul2748 - 10 Years Ago
|
Does the pedal go up and down smoothly? If not, it probably needs grease on the moving parts
|
|
By Vic Correnti - 10 Years Ago
|
|
I'm with Charlie, is the pedal near the floor when you start out in first? If so it might not be disengaging enough and in need of an adjustment. If you do adjust it be sure to have an inch or so free play when the pedal is at the top of it's stroke.
|
|
By Ted - 10 Years Ago
|
Have you checked the fluid level in the tranny? Check also that the transmission is fitting tightly to the bellhousing.
|
|
By texasmark1 - 10 Years Ago
|
great ideas all... thanks!
got my work cut out for me this weekend during the rain we're expecting.
thanks again, Mark
|