ECY casting number on 292 Rams Horn


http://209.208.111.198/Topic21776.aspx 		Print Topic | Close Window

By 46yblock - 16 Years Ago
Today I was cleaning up a Rams Horn manifold to take to the machinist, and noticed it has a casting number of ECY 6390 A.  So what year would that match  up with...'56 '57 or '58?  The C2TE is the casting number I have always heard.  My other RH is a C2TE. 

Both early and later units were exactly the same. 

By crab - 16 Years Ago
I just picked one up, ECY-9430-A , not sure what year its off of for certain, but its not Lincoln!!!

 

*************

Note added by Ted, Site Administrator / Moderator

Click here for picture posting instructions.

Please pay particular attention to the picture sizing attributes when linking from Photobucket or other picture storage sites.  Upon resizing the picture at the host site, the display attributes at this site will be automatically corrected without any further editing.  This picture was resized by Ted.

*************

By yalincoln - 16 Years Ago
hi, they used them on earlyier cabovers.
By Unibodyguy - 16 Years Ago
All the Rams Horns that I ran accross accept for one have been on cabovers. I've never found any on regular cab "big" trucks.

                                          Michael

By 46yblock - 16 Years Ago
Crab, yes the numbers you gave are the same as were on mine.  I misstated the middle four.  Were both styles of manifolds you picture on the same engine?
By crab - 16 Years Ago
Yes both in the picture, I was hoping to get a match to the nice one but thats what he had. He also had a  flywheel, PP, disk, 292 block with pop up pistons, water pump, oil pan and pump, valley cover. Had been rebuilt not too long ago but a little rust in a couple cylinders, still turned over nice.