Pulley on 239


http://209.208.111.198/Topic29403.aspx 		Print Topic | Close Window

By shawniverse - 16 Years Ago
I have a 239 and broke the pulley I have another one but it has a balancer on it.  It does not fit with the balancer can I just take it off.  If not were can I get another one.  I have power steering also so it has to be able to fit the other pulley.
By Ted - 16 Years Ago
As 239’s didn’t come with a harmonic damper (just a pulley), then technically you could remove the damper ring and install the remaining pulley section on the engine if that’s all it takes to have it fit.  I don’t particularly like the idea of running an engine without a harmonic damper but the 239’s were originally delivered this way so I can’t see that it would be a problem in the long run.
By shawniverse - 16 Years Ago
Thank you.  I would rather run it with it on also but it hits against the front motor mount. I am hoping that with it off it will fit and line up with everything else.  If anyone has a pulley that came off a 239 I would be interested in it.
By charliemccraney - 16 Years Ago
shawniverse (7/23/2009)
If anyone has a pulley that came off a 239 I would be interested in it.




If only Carl was not so eager to junk that 239 in the classifieds a few weeks ago!
By shawniverse - 16 Years Ago
I apprecate all your advice.  I called John Mummerts he had a used pulley and sold it to me.  I guess I am back on track now.  Thank you guys!!
By paul2748 - 16 Years Ago
Just as a matter of information, you can use the mount off a 55 or 56. It bolts up ok to the 54 frame mount
By shawniverse - 16 Years Ago
thank you for the info I have one from a 55