CEREAL KILLER (8/14/2009)

---

Ted, I can see the Profiles for North American Members but not the Off Shore Members (Seppo's for example). But then again are your trying to tell us something??

All I get is "Page Not Available" for Off Shore Profiles.

Didn’t believe there was a hidden message there until going back to the Profiles section and looking at them in more detail.  I originally only looked randomly at some of the North American profiles and all those I looked at were okay.  But I’ve since looked at the offshore areas and although the names come up under the markers, the individual profiles are not working.  I then looked at all the profiles in detail and the only ones that do work (subjective term) are in the United States with not all those actually coming up.  And Charlie, I didn’t see anything for you so you are currently lost (another subjective term).  I’ve already passed this on to Jim to see what it will take to resolve this.  I suspect this is something related to the last forum revamp and I’m sure he’ll figure it out.  He always does.

Thanks for pointing out the problems.  It’s difficult to come across these issues until they are pointed out.

              Michael

I agree about the SUs, too many people don't understand them so that makes them junk.  I think they are a fine and simple carb, I replaced the single Solex on Kathys Herald with a dual set up off a Spitfire and I run a single HD8 on the Supercharged TR6.  I also think the Quadra-jet is one fine carburetor but they too take a lot of bad mouthing.  Ignorance breeds contempt, something every Y guy should be use to. 

I'll bite, where did this injector intake come from. It's not a Hilborn!

The top set were made by the Mag Wheel Center in Sydney during the late 60,s on, by coincedence i had put my 56 customline into them to have radiused rear wheel archs done like a Buick at the time. The 2nd set are unknown and there were many home grown covers made, as the US was worlds away in those days. Best regards aussiebill.

The top set were made here in 70.s by drag racer Warren Armour who raced early holdens then rails, they are nice, the lower set are currently made here by Aussiespeed and also come polished. regards aussiebill.

I dont know who made these but are unique! regards bill.

Picture posting instructions

Our 2 old favourites!

 

heres pictures of the mainline the customline & the mainlines dashboard.

Here is a couple of mine without the camper.

sam & tom i did take the picture the wrong way round it should be upside down too lol.

daniel cant say for sure but i think clockwise we have to flush with the lid down as being down under if you leave the lid up it all comes out & you get soaked.

bill what can i say the customline needs a buff first & it just aint the weather for it some one sent the sydney weather to geelong, anyway when you get the a model on the road ya better bring it down here for a cut & polish lol.

yyy diliela yyy diliela

so before the srub guys break down my door

forgive me diliela i cant drive you anymore

Cant forget these!. MOZ, enjoyed your replies to everyone, i think that buffing compound might be new LSD brand? he, he. regards aussiebill.

http://www.ford-trucks.com/user_gallery/tmp/220/220296.520.390

We struggled with the hood for 2 hours and have to wait

to complete the installation until I can find out how the hood springs

mount.  It has been at least 14 years since the hood was on, so there

isnt a lot of remembrance left.

HMM.  Sorry about that, and I dont know how to fix it.

Mike

Chuck in NH

Nerf bars were made to look like the Ford "Battlebird" - Mustang 16 inch wheels and short rubber....

Grille came back from the plater after photo - still isn't on and I need to finish testing the hood seal set-up. Had to get a junker scoop grille off ebay and cut the bars out - otherwise whistles like crazy....  

We'll miss you buddy.  Doesn't Nokia know that Texans need some vacation time???

Dennis.  Let me have the pie to take back with me.  That way I can tell Jim how good it was.

To all the Shootout guys and their familys, have a successfull, safe  and happy time, lets push the Yblocks reputation up another notch, good luck! we need another picture.! Best regards aussiebill.