Data plate rivets?


http://209.208.111.198/Topic40808.aspx 		Print Topic | Close Window

By MG Cook - 15 Years Ago
Where can you purchase the correct rivets to install the data plate ? , I tapped one too hard while installing and screwed it up.

Only two was shipped with my new plate.

By RodgerF - 15 Years Ago
There's company on ebay that sells them along with a special punch to install them.  I bought a set from them along with the tool but I can't remember their name.

Rodger

By rgrove - 15 Years Ago
I *think* tee-bird products & macs sell them also
By Noob - 15 Years Ago
Check AMK Fasteners   http://www.amkproducts.com/  ... that's where I got mine... no tool needed really, just a wooden dowel worked for me... AMK has a whole bunch of vintage correct fasteners and clips and straps and etc...

Brian

By paul2748 - 15 Years Ago
Try A.G. Backeast. He sell new data plates www.datatags.com
By oldcarmark - 15 Years Ago
MG!Why dont you ask the supplier of your plate to send you a couple more?
By sofob0909 - 15 Years Ago
hey guys.

I am going to be getting my truck transfered over to my name soon. (not registered just title transfer)

Anyway here is delaware they said that i had to have the data plate on the truck. This is a problem because the cab has been primered and the plate was taken off by the precious owner.

I talked to the guys in the inspection lane. They said i had to have the origional rivets. They said this was to prevent theft.

well long story short, i dont have the rivets.

What to do???

By ecode ragtop - 15 Years Ago
also try marti auto works  www.martiauto.com , they have the rivets. hope this helps TOM DRUMMOND MIDWEST DIRECTOR 57 FORDS INTERNATIONAL
By MG Cook - 15 Years Ago
I ended up going back to A.G. Backseat and he sent me one, he charges $2.50 each for a set of two if anyone needs them. 
By paul2748 - 15 Years Ago
sofob0909 (3/9/2010)
hey guys.



I am going to be getting my truck transfered over to my name soon. (not registered just title transfer)



Anyway here is delaware they said that i had to have the data plate on the truck. This is a problem because the cab has been primered and the plate was taken off by the precious owner.



I talked to the guys in the inspection lane. They said i had to have the origional rivets. They said this was to prevent theft.



well long story short, i dont have the rivets.



What to do???




I would get the new rivets and then distress them to make them look old.