INTAKE GASKETS


http://209.208.111.198/Topic48306.aspx 		Print Topic | Close Window

By Ol Ford Guy - 15 Years Ago
I ordered a set of FelPro intake gaskets for my 312,.  I specified for a 63/64 truck so I would get the smaller exhaust heat passage  I received the gaskets and they have the full size 1" square heat passage.  The part number is MS 9361 B1, and it has 45196 in a little box too.  The application says that they are for 55-64 car and truck, 272" -312".  They may have changed their offerings to one set for all applications.  I found I had some extra gasket sets and have a set with the small holes, all metal.  Are the valley pan/push rod chamber cover grommet type washers the same as those for the valve covers?

Thanks,

By DANIEL TINDER - 15 Years Ago
Ol Ford Guy (8/12/2010)
Are the valley pan/push rod chamber cover grommet type washers the same as those for the valve covers?


Yes, though some people shave them down so they won't interfere with the intake.
By Jerryp - 15 Years Ago
Paul, The intake gaskets with the small heat riser hole is still available from victor reintz. The part number is MS15116. Fel pro doesn't make them any more. You will especially need them on your E code aluminum manifold.

Jerry

By oldcarmark - 15 Years Ago
Is there a reason you are not just using a piece of tin to cover the crossover completely?
By paul2748 - 15 Years Ago
I think Best gaskets has them
By oldcarmark - 15 Years Ago
So does Tee-Bird.com