|
By greengrenade - 15 Years Ago
|
|
im looking for a good place to buy some quality gaskets for my 239. what all is interchangable with the bigger y blocks ? any help is appreciated
|
|
By ejstith - 15 Years Ago
|
|
I get my gaskets from NAPA. Ebay nearly always has gasket sets but I have no idea what the quality is.
|
|
By Hoosier Hurricane - 15 Years Ago
|
|
All the gaskets for larger Ys fit. The head gaskets are different, and later steel shim gaskets won't seal a water passage and water leaks into the cylinder. The composition gaskets in the NAPA kit will seal.
|
|
By greengrenade - 15 Years Ago
|
|
so should i just ask for a gasket for a more common year 292 or whatever whn i go there. all i need right now is an intake gasket for the 239
|
|
By oldcarmark - 15 Years Ago
|
|
The intake gaskets for the 239 are a different part# from the 272-292 gasket sets.According to the NAPA online site the part # for 1954 239 engine is FPGMS9243B priced at about $9.00.I find the NAPA online site very handy for checking part#'s and availability.
|
|
By Hoosier Hurricane - 15 Years Ago
|
|
Whoa, I took in too much territory when I said "all" the gaskets will fit. Intake gasket, as mentioned above, is for the smaller ports. The 292 gaskets are iffy for sealing the ports.
|
|
By greengrenade - 15 Years Ago
|
|
hahaa i was pretty dman sure the 239 intake gaskets had to be different due to the port size. just ordered a set off of napa. thanks guys
|