Engine test stand almost ready

Engine test stand almost ready

Home
»
Keeping The Dream Alive!
»
This n That

http://209.208.111.198/Topic52068.aspx

Print Topic | Close Window

By 46yblock - 15 Years Ago

I am going to try and post two pics following Ted's instructions.

That worked well!

This test stand is made of the front of a '64 F250, and a '46 radiator and frame. Only need a H20 temp gauge and two switches, then can mount up my engine. Sometime maybe I will get rid of the axle and wheels and add some casters. For once hardly anything needed to be purchased, the exception being the missing temp gauge.

By mctim64 - 15 Years Ago

Nice job! Good use of what you had, that should work very well. Wink

By 46yblock - 15 Years Ago

Thanks Tim. If an elect. fuel pump is installed between the fuel and mechanical pump, would I be able to switch it on for initial carb filling, switch off, then crank engine for start? Would the fuel pass through the non operating mech. pump?

By mctim64 - 15 Years Ago

46yblock (11/24/2010)

Thanks Tim. Would the fuel pass through the non operating mech. pump?

Yep! Wink