|
By greengrenade - 15 Years Ago
|
|
so i have the stock 2v on my 239 right now. it runs fine but after the engine is shutoff it leaks where the linkage is attached to the carb. it only does it for maybe 10 seconds. ive read that the float may need adjusted to solve this problem. maybe a seal is bad ? also where can i get a good rebuild kit. dennis carpenter has one for 30 bucks. thanks
|
|
By PF Arcand - 15 Years Ago
|
|
First of all, clarification is needed of what the vehicle is? A model # for the carb would also be helpful. Often members go out ft there way to try and answer a question here, only to find out they have wasted there time, due to insufficient info..
|
|
By greengrenade - 15 Years Ago
|
|
sorry its a 54 customline with a stock 239. carb is stock. ill tryy to find a number for you guys asap. the only markings i can see at a quick glance is ebu on the drivers side of the carb body, and FORD script on the right.
|
|
By 55vickey - 15 Years Ago
|
|
You're probably not gonna find anymore #'s, except 94 & venturi size. I just cleaned up several of these carbs and I can't find any extra #'s. Gary
|
|
By greengrenade - 15 Years Ago
|
|
weve been tinkering and reduced the leak significantly. i have a rebuild kit on the way. i dont wann dump too much $ because i have a 390 holley 4v, new intake distributor and oil pump goin on in spring
|