rocker shaft oiling??


http://209.208.111.198/Topic56434.aspx
Print Topic | Close Window

By stuey - 14 Years Ago
hi everybody all the peeps

spotted this on E-bay     i've seen posts refering to this but this is the 1st time i've seen it    looks kinda weird!

stuey

By Ted - 14 Years Ago

What looks even more weird are the 312 valve covers on an engine with a two barrel carb.  Although the valve covers could just happen to be transplants to this engine, there’s a remote chance there is a 312 sitting under that intake manifold.

By 46yblock - 14 Years Ago
I wonder what that exhaust system would show on the Dyno BigGrin .
By mctim64 - 14 Years Ago
46yblock (3/10/2011)
I wonder what that exhaust system would show on the Dyno BigGrin .

That is a good question!  I've seen this kind of "Dual" exhaust on more engines than I care to mention, even back in high school I had a buddy with a '60 F-100 that said this was the only way to get dual exhaust on a Y.  I don't think he did his home work. Tongue

By Duck - 14 Years Ago
C code Tbirds came with those valve covers and a 2 V.
By Hoosier Hurricane - 14 Years Ago
That engine is in a truck, so a passenger car left exhaust manifold would not work, the steering box is in the way.
By 46yblock - 14 Years Ago
I used to have one a lot stranger than pictured.  Rams Horn on PS.  Driver side had the same front exiting manifold, but but turned 90 degrees to the outside, going through inner fender, down and back.  Fiberglass insulating tape was put on underneath of fender to keep heat buildup during idle from bubbling off paint  Hehe .
By The Master Cylinder - 14 Years Ago
I'm digging the "super trick" oiling system using extra long tubing for that cooling effect also... w00tw00t
By Hoosier Hurricane - 14 Years Ago
Thanks, Master Cylinder.  I had envisioned the kit being supplied with plenty of tubing and the installer had no way to shorten it and make it neat.  Cooling never entered my thoughts.
By Hoosier Hurricane - 14 Years Ago
Dinosaur, so now you have broken your promise.  I hope your buddy doesn't read this site.