c4 tranny Home » Keeping The Dream Alive! » Technical http://209.208.111.198/Topic64707.aspx

Print Topic | Close Window

By sallens - 14 Years Ago would a c4 tranny with these numbers fit my 292 y block D4DP-7006 thanks steve. By The Master Cylinder - 14 Years Ago AD4DP-7006-AA is a '74 C-4 and should be case filled (as opposed to a pan filled). Chech to see if it has the 24/26 input shaft. You will need an adaptor from Flat-o http://www.flat-o.com/carproducts/yblock.htm. By Glen Henderson - 14 Years Ago The trans will fit by using the flat o matic adapter, I have a case fill in the Falcon, I had to use a Lokar flexable dipstick tube. By paul2748 - 14 Years Ago sallens (10/18/2011) would a c4 tranny with these numbers fit my 292 y block D4DP-7006 thanks steve. I'm using a similar trans (70 model) behind a 312 in a TBird. Used the flat-o adapter. The flat-o adapter kit is very nice, everything fit. Ended up using the stock fill/dipstick tube but had to bend it a little. Also used the 56 kick down rod but had to modify it . I welded a bracket on the bellhousing to hold the tube in position. Lots of room between the engine and the firewall on a bird, not sure about a sedan. If you have a column shift, make sure the gear selector arm on the trans is down pointing. Since I had a floor shift, the trans should have an up pointing gear selector arm. By The Master Cylinder - 14 Years Ago Yes, I used the Lokar dipstick. I used the Lokar shifter.