Pcv and tri power


http://209.208.111.198/Topic69363.aspx 		Print Topic | Close Window

By iowa fords - 13 Years Ago
can you run your pcv hose to the center plug in the manifold?  I am thinking of running tri power and just want to make sure I have a place for my pcv.
By MarkMontereyBay - 13 Years Ago
I run mine in the intake port behind the front carb on my Edelbrock 573. Found a brass 90 degree nipple at the hardware store. Trimmed the hose barbed end enough to so I could thread it into the manifold.
By Riz - 13 Years Ago
I have the offy 3x2 and run the PCV to the port also with a 90* fitting behind the front carb as well. Aside from a cracked PCV line that had me chasing my tail there is no real issue.
By lowrider - 13 Years Ago
That's where I'm running mine also.
By Ted - 13 Years Ago

Here’s a link to a past discussion.

http://www.y-blocksforever.com/forums/Topic3221-3-1.aspx
By sallens - 13 Years Ago
my hole what everyone is using for there pcv, on my elelbrock 573 manifold is being used for my brake servo

can i put a tee peice in the hose?????????

and run both

              steve