|
By 55fordf100 - 13 Years Ago
|
how do you put in the flamethrower 3 electronic distributor piece im not real sure and i dont want to screw something up. Better to be safe then sorry haha.
|
|
By Talkwrench - 13 Years Ago
|
|
I should rememeber this Ive just done it.. Of course you remove the vacuum canister careful with the little circlip. The plate that is retained by the screws its totally removed. From memory Im sure it just comes out without removing anthything else, its only two or three screws. Now would be the time to put in some Mr Gasket 925D springs if you want. THe ignitor 3 goes in place of the plate just line up the holes and make sure the earth tail is back on. gently do it up and test that the unit doesnt hit the cams its very fine once your happy with it do it up tight, put the vacuum canister back on test again and your away!
|
|
By Talkwrench - 13 Years Ago
|
|
Oh I forgot to say I hope you have the matching coil, dont use a standard coil with it !
|
|
By 55fordf100 - 13 Years Ago
|
|
got the coil also and spark plug wires
|