ECZ-9425-B


http://209.208.111.198/Topic78883.aspx 		Print Topic | Close Window

By sallens - 12 Years Ago
i have this manifold ECZ-9425-B and a 9410s afb carter carb .

i am new to y blocks, can some one point me in the right direction and tell how to hook up the carb to the inlet manifold..

a diagram ,,web page ,,photo.. anythink that will help me ..

as i have no instructions...

many thanks

steve...........

By paul2748 - 12 Years Ago
I haven't had much experience with the AFB, but since its supposed to be the precursor to the Edelbrock it should just mount up on the intake (bolt pattern the same). You might have to fabricate the rod between the pedal linkage and the carb. Also check the holes in the carb to the intake to make sure they match up ok.



Get a heat spacer kit that goes between the carb and intake.