|
Author
|
Message
|
|
charliemccraney
|
|
|
Group: Moderators
Last Active: 7 hours ago
Posts: 6.1K,
Visits: 442.1K
|
8/15/2014
1/4 15.263 @ 91.08
1/8 9.870 @ 72.88
60' 2.428
Lawrenceville, GA
|
|
|
|
|
Hollow Head
|
|
|
Group: Forum Members
Last Active: 3 Months Ago
Posts: 1.0K,
Visits: 3.7K
|
List updated. Not sure about Tim's best time, but... Looking forward updates after Columbus  .
72% of original size (was 701x19) - Click to enlarge Seppo from Järvenpää, Finland
www.hollowheads.net (just click the hole in the head to proceed)
|
|
|
|
|
RB
|
|
|
Group: Forum Members
Last Active: 2 Months Ago
Posts: 653,
Visits: 16.7K
|
Ran my best times in the Warbird last night at Great Lakes Dragaway Union Grove Wi. 1/4 10.06 131 mph 1/8 6.41 107 mph 60' 1.41 This was run with 383 cu in Lincoln Y Block, 750 Holley, E-85 fuel
|
|
|
|
|
Hollow Head
|
|
|
Group: Forum Members
Last Active: 3 Months Ago
Posts: 1.0K,
Visits: 3.7K
|
Good numbers Royce. You will be at nines next time you go to strip! List updated again.
72% of original size (was 701x19) - Click to enlarge Seppo from Järvenpää, Finland
www.hollowheads.net (just click the hole in the head to proceed)
|
|
|
|
|
RB
|
|
|
Group: Forum Members
Last Active: 2 Months Ago
Posts: 653,
Visits: 16.7K
|
Update from shootout. In the 9s!! 1.41 60ft
9.92 133 mph 109 mph
Work on the 60 ft and do some tuning I think I can get a 9.75 out of it
|
|
|
|
|
Barry L
|
|
|
Group: Forum Members
Last Active: 2 Years Ago
Posts: 217,
Visits: 6.7K
|
Royce, was this with the Lincoln engine? Did J.C. make it to Columbus? Barry L
|
|
|
|
|
Hollow Head
|
|
|
Group: Forum Members
Last Active: 3 Months Ago
Posts: 1.0K,
Visits: 3.7K
|
Good numbers Royce! Like I said, you would dive into nines and now looking for 9.5. Right? I'll update this list again.
72% of original size (was 701x19) - Click to enlarge Seppo from Järvenpää, Finland
www.hollowheads.net (just click the hole in the head to proceed)
|
|
|
|
|
Hollow Head
|
|
|
Group: Forum Members
Last Active: 3 Months Ago
Posts: 1.0K,
Visits: 3.7K
|
List updated. Please, give me corrections and more info about cars to make it more interesting. Engine sizes, intakes etc.
72% of original size (was 701x19) - Click to enlarge Seppo from Järvenpää, Finland
www.hollowheads.net (just click the hole in the head to proceed)
|
|
|
|
|
RB
|
|
|
Group: Forum Members
Last Active: 2 Months Ago
Posts: 653,
Visits: 16.7K
|
Barry, Yes it has the 383 inch Lincoln Y Block engine in the WarBird.. JC made it but did not bring his car.
Here are the specs on my car:
I Body is a fiberglass 55 thunderbird
Engine is a 1957 Lincoln 368 Y block bored and stroked to 383. 12.5 compression, roller cam, home made intake. 750 Holley converted to E-85. It made slightly more than 500 hp at the crank. Racing C-4 with a 4000 stall converter. Frankland Quick Change rear with 4.44 gears. 10.5 W x 31 Mickey Thompson tires I doubt I can run in the 9.50s in present configuration. I am about maxed out on engine performance
|
|
|
|
|
Old Ironhead
|
|
|
Group: Forum Members
Last Active: Last Month
Posts: 14,
Visits: 622
|
Our T -Bird has run a best 1/4 mile of 11.21 & 120.8 mph; 1/8 mi is 7.10 @ 96.9 mph
342 inch all motor iron heads.
|
|
|
|