hey guys, i need to get a cam to run in my mcculloch blown 292 that I'm building, what cam do you guys recommend getting? 

If it is something off-the-shelf, you want one with wide lobe separation.  However, there is not anything that is readily available and suitable for blower use that I'm aware of.  So, the best course of action is to call your favorite cam grinder for a custom grind, tell them your goals, answer their questions, and take what they give you.  As long as you are honest with them and realistic about your goals, you will get the perfect cam that way.



Lawrenceville, GA

shadbolt cams in vancouver canada has the profile for 1957blowen 312.call barrey.

Doesn't Mummert have a blower cam? Check his site at http://www.ford-y-block.com/


Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

He had a repop a long time ago.  Haven't noticed it in quite a while.



Lawrenceville, GA

Over 108 lca and 270+ grind if manual or high stall and enchanted flow from air cleaner to the exhaust tips.
Lift as much as possible without hitting the pistons and can be grinded and lifters can follow.


Hyvinkää, FI

If I recall, Mummert's site said in the past that the original isn't available. And it's been rummered that there was more than one grind, so ?? Maybe someone on here has better information.. Good luck! 


Paul

thanks guys! i think ill contact a few local guys and see what they can grind for me!