Group: Forum Members
Last Active: 4 hours ago
Posts: 3.7K,
Visits: 32.5K
|
Hello All,I am looking for a front passenger door V-TRIM moulding for the INTERIOR door trim panel.1956 Fairlane 4dr.(wagon is same)Must be in good shape with the retainer clips intact.Thanks Mark

|
Group: Forum Members
Last Active: 3 days ago
Posts: 1.2K,
Visits: 20.6K
|
I parted out a 56 town sedan a couple years ago.i still have all 4 doors off of the car they are complete with in and out srainless and they are not rusted up.if you are interested in them i will give you a great deal on them Carl Lynn Circleville ohio
|
Group: Forum Members
Last Active: 4 hours ago
Posts: 3.7K,
Visits: 32.5K
|
Hi Carl,Thanks.I sent you a PM.Still looking for that item.Anyone got one?Regards Mark

|
Group: Forum Members
Last Active: 8 Years Ago
Posts: 854,
Visits: 6.0K
|
Mark, I have the trim you're looking for.The only problem is that I have both passenger and drivers side trims and I don't know which is which.One of them is in pretty good shape.The clips are all there and will probably work again,although they are a little rusty.The other one is not as good.It was bent and I straightened it as best I could.It doesn't look too bad and some of the clips are broken.Let me know if you're interested.

Paul, Boonville,MO
|
Group: Forum Members
Last Active: 4 hours ago
Posts: 3.7K,
Visits: 32.5K
|
To determine sides:Face the pointy end to your left.If the upper arm is curved that is the passenger side.Straight arm at bottom.The right side(passenger) is the one I am seeking.I have one on now that is damaged so I am looking for one in REAL good shape hopefully with most retainers intact.My left side is great with the retainers all there.Thanks for responding.Please let me know if yours is correct.

|
Group: Forum Members
Last Active: 8 Years Ago
Posts: 854,
Visits: 6.0K
|
Mark, Unfortunately,the one I have that's bent a little is the right side,but it just dawned on me today that I have another Town Sedan in my collection of parts cars and I think the interior panels are all still on it.I'll check as soon as I can get to it,which will likely be this weekend.

Paul, Boonville,MO
|