Been thrashing some and the mock up is beginning to excite me. Y Bloke manifold, 471 blower, Grant flamethrower, 2004 Cobra 5 speed, beam axel, Buick drums, jag rear. Been welding and grinding. Will post some pictures.
71% of original size (was 710x19) - Click to enlarge 
71% of original size (was 710x19) - Click to enlarge 

Mike, still lovin his 57 t'bird after 53 years!

Sorry don't know why they posted upside down. Never want to see it that way! Mike

Mike, still lovin his 57 t'bird after 53 years!

That's going to be a real nice car. Can't wait to see more of it.

Durham Missouri

Here's right side up (I hope)71% of original size (was 710x19) - Click to enlarge71% of original size (was 710x19) - Click to enlarge


54 Victoria 312;  48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ

Don't think I've ever seen a TBird air cleaner siting on top of a supercharger. Neat! Always thought a YBlock in an A would be fun.

Nice setup. I'm working on the same setup for my 56 Victoria. Where did you get the V-belt plies for the supercharger? Also do you know a place that has spares for the Grant/Spalding? Specifically looking for some of the internal rotors. Chuck

71% of original size (was 710x19) - Click to enlarge 


Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

Looking good you guys! Hope to be getting back on my 37 coupe this spring. It will be good to compare notes with you 471 blower guys!

Rono

71% of original size (was 710x19) - Click to enlarge  Ron Lane,  Meridian, ID

MoonShadow, the pulleys are a stock 2 sheave add on to a 1 sheave stock crank pulley plus a scruby crank pulley redrilled for the blower. MIKE

Mike, still lovin his 57 t'bird after 53 years!

Mike;

Just curious what you used for motor mounts for your Model A? . In my 37 coupe I used a cut down tubular FE mount welded to the frame rails.

Rono

71% of original size (was 710x19) - Click to enlarge  Ron Lane,  Meridian, ID

Rono, I used a truck front mount and am using a truck stick trans bellhousing. Hopefully these will post right side up!
71% of original size (was 710x19) - Click to enlarge 
71% of original size (was 710x19) - Click to enlarge 


Mike, still lovin his 57 t'bird after 53 years!