I have my motor stabbed with the T5 hung on it. I am preping to rework the original auto trans mount. My question is should the trans be centered between the frame rails? I have 17 7/8" on the driver side and 18 5/8" on passenger side. When I move it to center it wants to come back to its current position. I don't want to put anything in a bind thus my question. I cannot find an answer in my searches. Any help/info will be appreciated. Thanks in advance.

Rowen
55CV
Woodland, Ca

I do believe the motor and transmission are offset because of the rear end (ring and pinion)..

  Vic Correnti

Thanks for the replies fellas. Actually I have it corrected. More of a brain fart than anything else. I only double checked what I had before posting. While waiting I went under and triple checked. Seams I was hanging my tape up on a exhaust hanger. I paid a little more attention this time, (I thought I had) and all is well turns out it was a 1/4" out. I can make up an 1/8". Being a carpenter you'd think I would have done better the first time. Thanks for the replies again. It all helps
Rowen

Rowen
55CV
Woodland, Ca