Started the Wilwood installation with their Master Cylinder. This will be non-power; with all I've talked too with upgraded rear drum brakes this should work fine for me. The removal and install went right with their instructions. I know it will be tight working on the lines from the MC to the tees.

56 Vic, B'Ville 200 MPH Club Member, So Cal.

I just purchased a kit from Wilwood with 4 piston front discs + a Wilwood MC for my 56. Seems like any thing for a Mustang would fit a Falcon since they are on the same platform. Drop-N-Stop is no longer due to health reasons. Too bad as he understood Fords from 49-63.

56 Vic, B'Ville 200 MPH Club Member, So Cal.

...are Granada/Monarch wheels for front Discs  14" ?

The GRANADA/MONARCH had 14" wheels.
What you have to watch for is rotor size. The 6-cyl used 10" while the 8-cyl used 11".

____________________________

Paul, like I said it was several years ago and the brakes were part of a complete front end rebuild. New A arm bushings, the works. If I were to guess, I’d say the calipers were probably the GM “metric” style, small ones. As was mentioned above, the pads that come with the kit can be a big difference in performance. That was true when I did the front on my bird back in 1999.

These worked out fine, and a Nomad isn’t a light weight car.

Back in my younger days I was told that if I was making a lot of panic stops and having fade problems, it was a driving problem not a brake problem.

miker
55 bird, 32 cabrio F code
Kent, WA
Tucson, AZ

Miker: Interesting, because another source warned me away from the small "foreign" calipers to fit 14" wheels. Said they were disappointed in their performance... I've forgotten, are Granada/Monarch wheels for front Discs  14" ?..  In my opinion (for what that's worth) the old brake shop practice of always turning drums with every brake job was in many cases unnecessary. If they weren't scored, simply deglazing them would likely have been just fine.. 


Paul

Several years ago I helped put a 14” wheel disc brake kit on my buddy’s 56 Nomad. Wheels, brakes, etc. are pretty much the same for 50’s cars. The disc and calipers are noticeably smaller than 15” for obvious reasons. They work just fine on a street car, given the car is mostly used empty, and doesn’t tow a trailer. They might work fine under those conditions, I don’t know. But for street driving, even with a lot more power than stock, they’ll lock the front brakes for a panic stop. He’s running a little more wheel and tire than stock, and new radials. He was happy.

miker
55 bird, 32 cabrio F code
Kent, WA
Tucson, AZ

I have an ECI under floor Brake and clutch set-up on my 37 Ford coupe project and it is a quality set-up. I also have Drop and Stop disk brake set-ups on both my 56 wagon and 56 Customline. Yes, these kits do use Granada spindles that are reamed out to accept your stock tie rod ends, but they work just fine in my opinion. 

  Ron Lane,  Meridian, ID

At least for the 54-56 Fords, there are aftermarket disc brake kits available.  I know the Tbird suppliers carry them for the 55-57 Birds, which have the same front end as the 54-56 sedans.  There is a company in Connecticut that has kits for just about every Ford ever made.  Engineered Components Inc (ECI)





54 Victoria 312;  48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ

It doesn't appear that anyone makes a complete front disc brake kit for mid 50's Fords. Still requires searching around in Salvage Yard for some parts.  In the case of '57 cars, the 14" wheels also create a road block. Read that kits that fit the original wheels have small inadequate calipers.. So, now the wheels (& tires?) have to be replaced also... Anyone here know different?   


Paul

I’ve driven truck since 1974 and about 25 years in a logging truck. When going down hill in the mountains just drop the transmission into a lower gear and let the compression do the braking. If you ride the brakes,they will get hot and start fading until you dont have any braking anymore.in your situation I wouldnt worry, your car should be more than adequate to handle any mountain roads. Unless you are pulling a heavy trailer ,your car is just fine.btw Ive never drove a big truck that didnt have drum brakes.