|
Group: Forum Members
Last Active: Yesterday
Posts: 1.7K,
Visits: 305.5K
|
You have to bolt them in?
Maybe that's why they are called STOVE-BOLTS?
____________________________
|
|
Group: Forum Members
Last Active: 10 hours ago
Posts: 3.7K,
Visits: 32.6K
|
If You use SBC Wires it will be like a Heart Transplant. Your Motor might reject them and refuse to Start! LOL
 
|
|
Group: Forum Members
Last Active: 5 hours ago
Posts: 873,
Visits: 13.4K
|
Yes, the plug wire retainers are bolted to the block just like the older sbc, the wires follow the back of the block and under the exhaust manifolds
|
|
Group: Moderators
Last Active: 8 hours ago
Posts: 6.1K,
Visits: 442.3K
|
You have to bolt them in? 
Lawrenceville, GA
|
|
Group: Forum Members
Last Active: 5 hours ago
Posts: 873,
Visits: 13.4K
|
283 wires bolt right in
|
|
Group: Forum Members
Last Active: Last Week
Posts: 455,
Visits: 22.2K
|
i checked and found part number BMX700106.less than 30.00
|
|
Group: Forum Members
Last Active: Last Week
Posts: 455,
Visits: 22.2K
|
i got a nice set from napa.cheap
|
|
Group: Forum Members
Last Active: 10 hours ago
Posts: 3.7K,
Visits: 32.6K
|
62bigwindow (8/15/2019)
Cliff, do are the 283 wires long enough to use in the stock location on a y block? Making my own is out. I'd rather take a beating than make plug wires. The Casco set is very appealing. Not sure if You noticed they will assemble Wires for labour $20.00. I have a chart from them showing Measurements for Brackets and Wires.
|
|
Group: Forum Members
Last Active: Last Year
Posts: 884,
Visits: 14.3K
|
Cliff, do are the 283 wires long enough to use in the stock location on a y block? Making my own is out. I'd rather take a beating than make plug wires. The Casco set is very appealing.
Durham Missouri
|
|
Group: Forum Members
Last Active: 5 hours ago
Posts: 873,
Visits: 13.4K
|
Use wires for a 283 scruby (cheap)
|