Profile Picture

368 Lincoln Build

Posted By martyk98 6 Years Ago
You don't have permission to rate!
Author
Message
martyk98
Posted 6 Years Ago
View Quick Profile
Supercharged

Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)

Group: Forum Members
Last Active: 2 Years Ago
Posts: 160, Visits: 31.8K
I'm looking for professional input. I have a very nice 368 block. Not looking to build a race engine but wondering what i can do to pump it up a little. Can I run roller lifters/cam? 
Replies
KULTULZ
Posted 4 Years Ago
View Quick Profile
Supercharged

Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)

Group: Forum Members
Last Active: 10 hours ago
Posts: 1.6K, Visits: 304.7K
Outfit called FBO Ignition out of Cottage Grove, OR.  They have a website on the internet.


Well I'll be darned ... w00t

I am aware of them but had no idea they could convert a LOAD-O-MATIC DIST to a DUAL ADVANCE.

I am reading this right?

BTW - ABSOLUTELY BEAUTIFUL WORKMANSHIP!

What is it going in and will it be a show car or driver?



____________________________

martyk98
Posted 4 Years Ago
View Quick Profile
Supercharged

Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)Supercharged (403 reputation)

Group: Forum Members
Last Active: 2 Years Ago
Posts: 160, Visits: 31.8K
It's going in my driver. 54 Mercury Monterey. I'll remove the 302 and keep the AOD. Already have the adapter, just want to make sure we fix all the gremlins before the swap.  It's way easier to fix everything before it slips in to the engine bay. We need to fab motor mounts and check oil pan clearance and exhaust options. Fortunately we have a spare block to tinker with so all our hard work can go in after.http://forums.y-blocksforever.com/uploads/images/959320d7-83bd-4d6d-bc57-c924.jpg
KULTULZ
Posted 4 Years Ago
View Quick Profile
Supercharged

Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)Supercharged (3.9K reputation)

Group: Forum Members
Last Active: 10 hours ago
Posts: 1.6K, Visits: 304.7K
The MERC is beautiful also. I think I am getting jealous ... Sad

Will it be for show or a driver?




____________________________


Threaded View

Threaded View
Forum Post 368 Lincoln Build By martyk98 ( 6 Years Ago )
Forum Post What vehicle? Are you wanting to keep it original looking? If not,... By Joe-JDC ( 6 Years Ago )
Forum Post [quote]... a couple of spacers, and a SBC intake manifold help... By KULTULZ ( 6 Years Ago )
Forum Post [quote][b]KULTULZ (11/8/2019)[/b][hr][quote]... a couple of spacers,... By Ted ( 6 Years Ago )
Forum Post [B]THANX![/B] again Ted ... really appreciated. Those adapters are... By KULTULZ ( 6 Years Ago )
Forum Post I have one of those Hilborns stamped 303. It was on a 368 race engine... By martyk98 ( 6 Years Ago )
Forum Post Read This -... By KULTULZ ( 6 Years Ago )
Forum Post I've already talked to them. They won't do a retro, just sell you new... By martyk98 ( 6 Years Ago )
Forum Post If you have the 303 olds injector body they are easy to adapt to the... By RB ( 6 Years Ago )
Forum Post [quote][b]martyk98 (11/13/2019)[/b][hr] I've already talked to... By KULTULZ ( 6 Years Ago )
Forum Post or the info and advice. I have decided against rollers. The cam is at... By martyk98 ( 6 Years Ago )
Forum Post That is going to be one beautiful ride ... For any 368CI HP info,... By KULTULZ ( 6 Years Ago )
Forum Post How about 8 webers? By martyk98 ( 6 Years Ago )
Forum Post Those will work ... ;) By KULTULZ ( 6 Years Ago )
Forum Post I've got an email in to Jim Inglese in Florida. He's the Weber Guru. By martyk98 ( 6 Years Ago )
Forum Post FYI-in case anyone is interested: Weber sold out years ago. Repos were... By martyk98 ( 6 Years Ago )
Forum Post [quote]FYI-in case anyone is interested: Weber sold out years ago.... By KULTULZ ( 6 Years Ago )
Forum Post Well, I'm on m way with the 368 rebuild. Cam is back, Block cleaned,... By martyk98 ( 6 Years Ago )
Forum Post Let the fun begin. Cam and bearings are in. Plugs and slugs. Waiting... By martyk98 ( 6 Years Ago )
Forum Post Looks good Marty.. A small suggestion.. If you bought stock type... By RB ( 6 Years Ago )
Forum Post We're using the original pistons and rods. This motor was well taken... By martyk98 ( 6 Years Ago )
Forum Post Its nice to have a spare block to help in fabricating mounts and heads... By KULTULZ ( 6 Years Ago )
Forum Post This is going in my 54 Merc Monterey. The car is already done, I just... By martyk98 ( 6 Years Ago )
Forum Post Hey Ted, gotta extra exhaust valve you want to part with? Marty By martyk98 ( 2 Years Ago )
Forum Post hi! 57 to 64 HD trucks used a late holley pattern intake with a normal... By yalincoln ( 5 Years Ago )
Forum Post RE: 368 Lincoln Build By KULTULZ ( 5 Years Ago )
Forum Post Beautiful motor "K". I'm going to lean away from a traditional intake... By martyk98 ( 5 Years Ago )
Forum Post [quote]Beautiful motor "K". I'm going to lean away from a... By KULTULZ ( 5 Years Ago )
Forum Post Besides not getting parts delivered on time, now UPS says they dropped... By martyk98 ( 5 Years Ago )
Forum Post RE: 368 Lincoln Build By martyk98 ( 5 Years Ago )
Forum Post RE: 368 Lincoln Build By martyk98 ( 5 Years Ago )
Forum Post RE: 368 Lincoln Build By martyk98 ( 5 Years Ago )
Forum Post Got the Weber/SBC intake manifold today. Unbolted the weber plenum.... By martyk98 ( 5 Years Ago )
Forum Post Advice is Wanted: I'm still looking for a new distributor. Should I... By martyk98 ( 5 Years Ago )
Forum Post I would use a 57 or later distributor because it would look more... By FORD DEARBORN ( 5 Years Ago )
Forum Post That drive gear is the same as a 390. I had to replace a couple and... By mjs ( 5 Years Ago )
Forum Post Thanks. I have the gears and the distributor. I thought someone might... By martyk98 ( 5 Years Ago )
Forum Post Just got the adapters back from my machinist friend, Harry. These go... By martyk98 ( 5 Years Ago )
Forum Post ee By martyk98 ( 5 Years Ago )
Forum Post Our engine is running with stock intake and carb setup. After a few... By martyk98 ( 5 Years Ago )
Forum Post Well....Our engine is super hard to start and there is a lot of crank... By martyk98 ( 5 Years Ago )
Forum Post Are the piston ring end gaps adequate? Beyond that, I’ll suggest a... By Ted ( 5 Years Ago )
Forum Post ALL cylinders have low compression. We're thinking the cam timing is... By martyk98 ( 5 Years Ago )
Forum Post Does it still have the carb and stock manifold? What changed from 4... By DryLakesRacer ( 5 Years Ago )
Forum Post We can't figure it out. It started up right away first time. After it... By martyk98 ( 5 Years Ago )
Forum Post Typically, retarded timing will cause the engine to run hotter than... By Joe-JDC ( 5 Years Ago )
Forum Post Was fresh fuel being used when the engine was first started? If the... By Ted ( 5 Years Ago )
Forum Post Check the balancer for true top dead center.. Like Joe says, hard... By RB ( 5 Years Ago )
Forum Post Thanks for all the advice. We are checking each and every idea. Gas... By martyk98 ( 5 Years Ago )
Forum Post One tooth of timing is way too much either way.. My guess is it one... By RB ( 5 Years Ago )
Forum Post I got an engine to run once being a tooth off and it was unbelievably... By DryLakesRacer ( 5 Years Ago )
Forum Post OK, Timing: we have gone through the gambit of rotating the... By martyk98 ( 5 Years Ago )
Forum Post Did you check your rocker arm ratio and valve tip relationship? With... By Joe-JDC ( 5 Years Ago )
Forum Post Good thought Joe, that's on our list. Fortunately there is a lot of... By martyk98 ( 5 Years Ago )
Forum Post 20-21 inches of vacuum is a lot.. That cam must not be a big step up... By RB ( 5 Years Ago )
Forum Post To piggy back on Joe's comments one thing you could try is to back... By RB ( 5 Years Ago )
Forum Post All comments up to this point are valid. I’ll add a couple more.... By Ted ( 5 Years Ago )
Forum Post Leak down test coming this week. You're right, the cam is not too... By martyk98 ( 5 Years Ago )
Forum Post Well...It's not the valves. It's the cam shaft. The new grind is so... By martyk98 ( 5 Years Ago )
Forum Post What did you determine was the problem with the cam? Is it a regrind... By RB ( 5 Years Ago )
Forum Post Like Royce, I would like to know more details on the camshaft and... By Ted ( 5 Years Ago )
Forum Post Yeah, the initial timing thing threw us too. Anyway, long story... By martyk98 ( 5 Years Ago )
Forum Post I"d like to see the numbers. I assume these are the numbers you came... By Oldmics ( 5 Years Ago )
Forum Post Boy that's a new one on me, a regrind being that far off... If you... By RB ( 5 Years Ago )
Forum Post By the way, where are you guys located? By RB ( 5 Years Ago )
Forum Post Puyallup, WA, a small town just SE of Tacoma. It's not us, it's the... By martyk98 ( 5 Years Ago )
Forum Post I have worked with Oregon Cams and Delta cams up in that area.. Both... By RB ( 5 Years Ago )
Forum Post They turned the two I gave them around in short order. Got them back... By martyk98 ( 5 Years Ago )
Forum Post It appears the intake is the problem. It opens at 36 degrees BTDC and... By martyk98 ( 5 Years Ago )
Forum Post Total agreement on the numbers being out of whack. What were the... By Ted ( 5 Years Ago )
Forum Post If you could post a copy of the cam card sent back from the grinder... By RB ( 5 Years Ago )
Forum Post It's been too long since the grind, sorry, no card. As far as the... By martyk98 ( 5 Years Ago )
Forum Post We're up and running. Cam swap did the trick. All cylinders at 145.... By martyk98 ( 5 Years Ago )
Forum Post You will likely have to do your own linkage design with bell cranks... By RB ( 5 Years Ago )
Forum Post Vacuum is going to be an issue. With my custom made adaptors which fit... By martyk98 ( 5 Years Ago )
Forum Post Do Webbers not have vacuum ports for that purpose? By charliemccraney ( 5 Years Ago )
Forum Post To get an accurate vacuum reading you need to have a common plenum.... By RB ( 5 Years Ago )
Forum Post https://www.alkydigger.net/proddetail.php?prod=AD-Vacuum By RB ( 5 Years Ago )
Forum Post That would be fine if I had a full intake manifold. I'm working with a... By martyk98 ( 5 Years Ago )
Forum Post Marty, I just went thru a similar exercise on an Algon FI unit for my... By miker ( 5 Years Ago )
Forum Post I would love to PM you but I'm getting a "cannot do" error when I try.... By martyk98 ( 5 Years Ago )
Forum Post For balancing Weber carbs, I use a Unisync tool. Works also for... By Ted ( 5 Years Ago )
Forum Post Here's the start of my Weber makeover. By martyk98 ( 5 Years Ago )
Forum Post RE: 368 Lincoln Build By martyk98 ( 5 Years Ago )
Forum Post The rear Weber on the distributor side makes my stock cap not fit.... By martyk98 ( 5 Years Ago )
Forum Post Look for a marine cap for a Ford distributor. I think MSD or Mallory... By RB ( 5 Years Ago )
Forum Post Another option would be to hunt down a Mallory model YL distributor... By RB ( 5 Years Ago )
Forum Post Thanks for the info. As you know, searching for anything Y block on... By martyk98 ( 5 Years Ago )
Forum Post Are you using the 56 dual advance Load a Matic distributor? If so it... By RB ( 5 Years Ago )
Forum Post aas By martyk98 ( 5 Years Ago )
Forum Post That is the earlier distributor, which will need to be replaced.... By charliemccraney ( 5 Years Ago )
Forum Post you might find a early truck engine, as,some of them had gear driven... By 2721955meteor ( 5 Years Ago )
Forum Post If I install a spacer on one then I 'll need to space all (linkage).... By martyk98 ( 5 Years Ago )
Forum Post I see your problem.. And it is a tough one. It's not the carb... By RB ( 5 Years Ago )
Forum Post I'm going to try Charlie's idea first. It's the cheapest and seems to... By martyk98 ( 5 Years Ago )
Forum Post Now that you see the problem, I would start over with two new spacers,... By Joe-JDC ( 5 Years Ago )
Forum Post Was there a "crab" cap available ever? By Lord Gaga ( 5 Years Ago )
Forum Post I have never seen a crab cap for this distributor. Joe: I'm not seeing... By martyk98 ( 5 Years Ago )
Forum Post I think he's talking about the aluminum blocks you made, spanning the... By charliemccraney ( 5 Years Ago )
Forum Post The two aluminum spacers. Move the two rear ports forward on both... By Joe-JDC ( 5 Years Ago )
Forum Post Going with Charlie's plan A first. Plate aluminum is at the machine... By martyk98 ( 5 Years Ago )
Forum Post Well, the blocks will do the trick. I need to massage them a little to... By martyk98 ( 5 Years Ago )
Forum Post 387 A is a Y Block marine distributor, if that's what you want E... By Cliff ( 5 Years Ago )
Forum Post Just purchased a 57-63 Ford Distributor with combo mechanical and... By martyk98 ( 5 Years Ago )
Forum Post Thanks Cliff, should clean up nice. By martyk98 ( 5 Years Ago )
Forum Post I have a few more By Cliff ( 5 Years Ago )
Forum Post Wow! There are two Ducoil distributors in that collection. Way cool! By wrcannon1 ( 5 Years Ago )
Forum Post Nice collection! By martyk98 ( 5 Years Ago )
Forum Post Well, the Mallory distributor isn't going to work. It's just as tall... By martyk98 ( 5 Years Ago )
Forum Post Mallory has a crab cap that is a lot shorter.... By Cliff ( 5 Years Ago )
Forum Post Isn't that just for the front mounted flathead engines?... By paul2748 ( 5 Years Ago )
Forum Post I'll bet a clever person could make that cap fit. By Lord Gaga ( 5 Years Ago )
Forum Post Better look... By Cliff ( 5 Years Ago )
Forum Post The 8 cylinder flat (crab) cap sold by Mallory is simply a red version... By Cliff ( 5 Years Ago )
Forum Post At a closer look, I think we can all agree the diameter of the crab... By martyk98 ( 5 Years Ago )
Forum Post we are at a slight stand-still with linkage. Jim Inglese says he... By martyk98 ( 5 Years Ago )
Forum Post Don't give up on me, I might have found a local that can help with my... By martyk98 ( 5 Years Ago )
Forum Post I found my man. He'll be taking my assembly after the holidays. He's... By martyk98 ( 5 Years Ago )
Forum Post The 16th is the big day. I bundle everything up and take it to Tacoma.... By martyk98 ( 4 Years Ago )
Forum Post Engine, carbs and accessories delivered. Now I wait for results. By martyk98 ( 4 Years Ago )
Forum Post Marty; Don't know, but have you tried garycroan@gmail.com in... By PF Arcand ( 4 Years Ago )
Forum Post Funny you should mention Gary. Earlier, (2019) he tried to give me a... By martyk98 ( 4 Years Ago )
Forum Post hi! do they make an adaptor for a FE? check with Royce but i believe... By yalincoln ( 4 Years Ago )
Forum Post are saying an FE adapter with fit a 368? By martyk98 ( 4 Years Ago )
Forum Post My understanding is that the LYB bell housing bolt pattern is on a... By Ted ( 4 Years Ago )
Forum Post Several people have jiggered the holes and removed the dowel pins on a... By RB ( 4 Years Ago )
Forum Post I just received the first picture of my Weber 368 project. I like the... By martyk98 ( 4 Years Ago )
Forum Post Just finished my first attempt at engine turning. This valley pan was... By martyk98 ( 4 Years Ago )
Forum Post Before and after By martyk98 ( 4 Years Ago )
Forum Post Just when you all thought I have given up or left the site, I'm still... By martyk98 ( 4 Years Ago )
Forum Post Just a suggestion, I have seen a couple of engines done with a 2k... By ian57tbird ( 4 Years Ago )
Forum Post Thanks for the tip, what I don't see is any shade of aluminum color.... By martyk98 ( 4 Years Ago )
Forum Post 2K or 2 Pack describes coatings that require a hardener or catalyst,... By ian57tbird ( 4 Years Ago )
Forum Post Google POR. I used some of their clear on my engined turned pieces... By martyk98 ( 4 Years Ago )
Forum Post OK, now that our hot summer is fading fast, it's time to get moving on... By martyk98 ( 4 Years Ago )
Forum Post The Valley pan has another pan under it so the vacuum lines work... By martyk98 ( 4 Years Ago )
Forum Post I’d get a bottle or 2 of brush on clear coat for the brass/copper. The... By DryLakesRacer ( 4 Years Ago )
Forum Post Right side up By paul2748 ( 4 Years Ago )
Forum Post Good idea, I think my POR clear will do the same By martyk98 ( 4 Years Ago )
Forum Post Carbs, wires and throttle linkage on. Working on the water lines next.... By martyk98 ( 4 Years Ago )
Forum Post Still working on the coolant lines but we did get the fuel pump on... By martyk98 ( 4 Years Ago )
Forum Post no work on the engine lately, my partner had eye surgery and is... By martyk98 ( 4 Years Ago )
Forum Post After running the motor for a time, we are discovering the vacuum... By martyk98 ( 4 Years Ago )
Forum Post You could use the vacuum distributor to trigger an external,... By charliemccraney ( 4 Years Ago )
Forum Post Or switch to a post-'56 Y-block distributor, just change from the 14... By Dobie ( 4 Years Ago )
Forum Post It looks like the problem is any distrilblutor other than a load o... By FORD DEARBORN ( 4 Years Ago )
Forum Post Well, we thought it over and after weighing all the options, decided... By martyk98 ( 4 Years Ago )
Forum Post [quote]... decided to go with the guy in Oregon that converts the... By KULTULZ ( 4 Years Ago )
Forum Post Outfit called FBO Ignition out of Cottage Grove, OR. They have a... By martyk98 ( 4 Years Ago )
Forum Post [quote]Outfit called FBO Ignition out of Cottage Grove, OR. They... By KULTULZ ( 4 Years Ago )
Forum Post It's going in my driver. 54 Mercury Monterey. I'll remove the 302 and... By martyk98 ( 4 Years Ago )
Forum Post The MERC is beautiful also. I think I am getting jealous ... :( Will... By KULTULZ ( 4 Years Ago )
Forum Post Oh, yeah, they do the conversion of Pertronix small block... By charliemccraney ( 4 Years Ago )
Forum Post The original color was that soft green. Reminded me of the walls of my... By martyk98 ( 4 Years Ago )
Forum Post Just got off the phone with FBO Ignition. Don sez he can retro my... By martyk98 ( 4 Years Ago )
Forum Post Distributor is home. Looks fantastic. Can't wait to see it installed... By martyk98 ( 4 Years Ago )
Forum Post That’s a really impressive build. I’m thinking I may need to talk to... By miker ( 4 Years Ago )
Forum Post I'll get some pictures to you tomorrow. I've been fighting a prostate... By martyk98 ( 4 Years Ago )
Forum Post OK Miker, here you go: He even ID'd the housing underneath for future... By martyk98 ( 4 Years Ago )
Forum Post He give you the advance curve? Weights are under the plate I assume.... By miker ( 4 Years Ago )
Forum Post So, correct me if I am wrong. If I understand correctly, this is a... By bird55 ( 3 Years Ago )
Forum Post The distributor I had modified was a load-matic for a 56-57 368... By martyk98 ( 3 Years Ago )
Forum Post Yes, he included a spec sheet. By martyk98 ( 4 Years Ago )
Forum Post Don't count us out. I've had a setback with prostate surgery and nasty... By martyk98 ( 3 Years Ago )
Forum Post Just get yourself well - a speedy recovery.................... By FORD DEARBORN ( 3 Years Ago )
Forum Post Major Set-back!! We go to install our newly modified distributor to... By martyk98 ( 3 Years Ago )
Forum Post Not sure of what you have? I thought the loadomatic went out at the... By FORD DEARBORN ( 3 Years Ago )
Forum Post Edit I only mentioned the 2 different gears because I know how... By FORD DEARBORN ( 3 Years Ago )
Forum Post Which part of it doesn't fit? By charliemccraney ( 3 Years Ago )
Forum Post I needed to replace the gear on my 368. As i recall when I called my... By mjs ( 3 Years Ago )
Forum Post The housing is the problem. The diameter of the housing won't... By martyk98 ( 3 Years Ago )
Forum Post Glad you found the problem I have on hand here both a Ford and... By FORD DEARBORN ( 3 Years Ago )
Forum Post Thank you. I sent the unit back on Saturday. He must have grabbed the... By martyk98 ( 3 Years Ago )
Forum Post Well.... It was more than just the housing. I sent it back and got... By martyk98 ( 3 Years Ago )
Forum Post Sorry to hear about the additional problems. Hard to see the internal... By FORD DEARBORN ( 3 Years Ago )
Forum Post I hear you. I think the issue is when they modified the shaft to fit... By martyk98 ( 3 Years Ago )
Forum Post That's one thing about being retired, you don't have to be in a hurry.... By martyk98 ( 3 Years Ago )
Forum Post 8 Webers or 4 two-barrel Webers? By 55blacktie ( 3 Years Ago )
Forum Post 4 two barrels. My partner had COVID so between crummy weather and him... By martyk98 ( 3 Years Ago )
Forum Post we're still here. Being lazy about finishing up the engine. It's 90+... By martyk98 ( 3 Years Ago )
Forum Post well, we installed the rebuilt distributor. It ran for about 15... By martyk98 ( 3 Years Ago )
Forum Post Did you try rotating the gear 180° on the shaft to see if the holes... By Ted ( 3 Years Ago )
Forum Post The whole shaft has been "redesigned" using a sleeve of some kind to... By martyk98 ( 3 Years Ago )
Forum Post Well, this whole distributor modification thing has finally been... By martyk98 ( 3 Years Ago )
Forum Post we have our engine tuned and ready. will start the swap after New... By martyk98 ( 3 Years Ago )
Forum Post We started the final tune on the 368 with the Chinese knock off... By martyk98 ( 2 Years Ago )
Forum Post You don’t mention if the fuel is coming out of the throats or the... By Ted ( 2 Years Ago )
Forum Post Thanks Ted, we did modify the cam just a little but it's still pretty... By martyk98 ( 2 Years Ago )
Forum Post Marty, what size are those Webers. Bore and Venturi. It’s been... By miker ( 2 Years Ago )
Forum Post Hi Mike- They are 48 IDF Chinese Weber knock offs. I was told... By martyk98 ( 2 Years Ago )
Forum Post Out with the 302, fitting the adaptor to our extra block. We're being... By martyk98 ( 2 Years Ago )
Forum Post Any chance you can get a couple air fuel meters, one on each bank? If... By miker ( 2 Years Ago )
Forum Post Our build has come to an end. One of the bronze guides wasn't fitted... By martyk98 ( 2 Years Ago )
Forum Post Very sorry to read this. You fellas poured in way too much effort to... By FORD DEARBORN ( 2 Years Ago )
Forum Post we're considering it but probably not. I need an exhaust valve. EGGE... By martyk98 ( 2 Years Ago )
Forum Post Got a valve and gaskets. We're going to try to put this back together... By martyk98 ( 2 Years Ago )
Forum Post Everything put back together. The engine runs fine but we still have... By martyk98 ( 2 Years Ago )
Forum Post compression check went good, we're sure it was low earlier due to fuel... By martyk98 ( 2 Years Ago )
Forum Post Really sorry to hear that guys.. And you were so close.. Building a... By RB ( 2 Years Ago )
Forum Post So far I have had inquiries from local to Norway, including France.... By martyk98 ( 2 Years Ago )
Forum Post Motor sold locally, no shipping. By martyk98 ( 2 Years Ago )


Reading This Topic


Site Meter