Group: Forum Members
Last Active: 2 Years Ago
Posts: 1.1K,
Visits: 58.8K
|
Thanks! I will check that out.
A L A N F R A K E S ~ Tulsa, OK
|
Group: Administrators
Last Active: Yesterday
Posts: 7.4K,
Visits: 205.1K
|
Here’s the link to the post on the Speed Talk forums. 355 y block on the Dyno - Don Terrill’s Speed-Talk
 Lorena, Texas (South of Waco)
|
Group: Forum Members
Last Active: Yesterday
Posts: 1.2K,
Visits: 1.7K
|
What's the price tag on that engine?
|
Group: Forum Members
Last Active: Last Year
Posts: 912,
Visits: 7.4K
|
The engine has been a revolving R&D peice for the last 5 years or so. Some of the core parts were purchased 5 years ago so prices certainly havent gone down. Its not a cheap date.
http://ford-y-block.com 20 miles east of San Diego, 20 miles north of Mexico 
|
Group: Forum Members
Last Active: Last Month
Posts: 56,
Visits: 95.8K
|
Just curious, is the C4 original to the white T-Bird? If so it was built by TCI for use up to 1000 HP. Ernie
|
Group: Forum Members
Last Active: Last Year
Posts: 912,
Visits: 7.4K
|
There are couple race transmissions, in rotation for the car. This particular tranny had 2.20 low. I think one of the clutch pack seals was faulty, it leaked checked good during assembly. This particular tranny has alot of line pressure 280lbs.
http://ford-y-block.com 20 miles east of San Diego, 20 miles north of Mexico 
|
Group: Forum Members
Last Active: Last Month
Posts: 56,
Visits: 95.8K
|
Thanks for the info. Ernie
|
Group: Forum Members
Last Active: Last Year
Posts: 1.7K,
Visits: 340.0K
|
You need to loan that engine to Tim for his LSR C/Gas Roadster…
56 Vic, B'Ville 200 MPH Club Member, So Cal.
|