|
Group: Forum Members
Last Active: 12 Years Ago
Posts: 202,
Visits: 1.4K
|
I need some opinions.........1956 victoria...292...stock...with 700R4 Trans.........3.89 rear............On test drive today.....50 MPH..@ 1800 RPMs.........60 MPH...@2100 Rpms.........70 MPH ........2500 RPMs.....................Anybody have any thoughts ? Would like to bring RPMs dowm alittle , but not to bad ...Talk to me .............Sam................... West Central Florida.......................ps....83 degrees here today !!!!
56 victoria
|
|
Group: Forum Members
Last Active: 12 Years Ago
Posts: 202,
Visits: 1.4K
|
Pete, I have no idea what the stll speed is !! This is a stock 700R4 trans. Shifts well at the right speeds...there is no switch to lock the converter. It may be me , but it seems to me the RPM s are alittle high , and wanted some opinions from other y-blockers...........Sam.......................West Central Florida
56 victoria
|
|
Group: Forum Members
Last Active: 4 Years Ago
Posts: 721,
Visits: 93.2K
|
About your 700r4 transmission torque converter lock-up. The car it came out of had some means of "talking" to the torque converter and "telling it" to lock and unlock. Computer and/or a speed sensing unit that sent the signal. Since your 1956 is not equipped with this device a simple on/off switch is put in. You "tell" it to lock/unlock via this switch. Google 700R4 switch for more info. Or ask the place you bought the transmission. Pete
|