Author
|
Message
|
mongo
|
|
Group: Forum Members
Last Active: Last Week
Posts: 224,
Visits: 556
|
Barry, the 1/2 moon cut with 2 3/8ths holes bolt right onto the header flange, the rubber grommets and chrome washers from the stock setup , attach to the stock mount on the frame. This is a prototype , and is working well. I will not be able to get to the drivers side until after growing season, Dave
Po ol Davie Sparta , Tn.
|
|
|
Barry L
|
|
Group: Forum Members
Last Active: 2 Years Ago
Posts: 217,
Visits: 6.7K
|
Hi Interesting adaptation....any more pics?? I'm not quite clear on the stabilizer mount.... can you get a pic from another angle?? Barry
|
|
|
mongo
|
|
Group: Forum Members
Last Active: Last Week
Posts: 224,
Visits: 556
|
Here's the finishing touches to the pass side ,from the bottom. The engine mount stabilizer bar with fabbed up one that attched to header flange. Seems to work fine, maybe even a little stiffer than stock. 
Po ol DavieSparta , Tn.
|
|
|
mongo
|
|
Group: Forum Members
Last Active: Last Week
Posts: 224,
Visits: 556
|
I have been busy with my other cars, the drivers side is going to be more challenging , but the pass side is all done . came out great , no leaks ,quiet . Will update this post with drivers side, my no. is 931-739-0152
Po ol DavieSparta , Tn.
|
|
|
Unibodyguy
|
|
Group: Forum Members
Last Active: 13 Years Ago
Posts: 240,
Visits: 848
|
I think there would be a market for this. I wonder how it would work for trucks? Should have plenty of clearance I would think.
MichaelSandy Valley, NV
|
|
|
GREENBIRD56
|
|
Group: Forum Members
Last Active: Last Year
Posts: 1.7K,
Visits: 102.7K
|
Any pic's of the drivers side available yet? I was wondering what you have to do to clear the steering shaft..... This is a great idea and useful for many projects with a tight budget .......
Steve Metzger Tucson, Arizona
|
|
|
Greg D
|
|
Group: Forum Members
Last Active: 14 Years Ago
Posts: 72,
Visits: 181
|
That is pretty interesting. I have wondered about this swap myself.
1964 F 100 LWB Roller 5.0 & T-5
2001 Jeep Cherokee XJ
2009 Harley FXSTB Night Train
"I still have a Y block - it's just not in anything yet."
|
|
|
mongo
|
|
Group: Forum Members
Last Active: Last Week
Posts: 224,
Visits: 556
|
a little grinding on the bottom of the flange blank , the wires fit fine with clearance. As with any header app. you may have to make a special tool , there is nice room, I would not want to change them ,when they are hot !!!
Po ol DavieSparta , Tn.
|
|
|
charliemccraney
|
|
Group: Moderators
Last Active: 1 hour ago
Posts: 6.1K,
Visits: 441.8K
|
How is spark plug access? Can you get a plug socket on them?
Lawrenceville, GA
|
|
|
simplyconnected
|
|
Group: Forum Members
Last Active: 3 Years Ago
Posts: 302,
Visits: 835
|
Good job, Dave.
Royal Oak, Michigan (Four miles north of Detroit, and 12 miles NORTH of Windsor, Canada). That's right, we're north of Canada.Ford 292 Y-Block major overhaul by simplyconnected
|
|
|