I lost my directions for the petronix & seem to remember a specified gap... Any help?

I dont remember a gap when installing mine but I did make a attempt to forget everything about that but I do believe the instructions are on their website.  Good luck.

1958 F100 292

"Nothing is particularly hard if you divide it into small jobs."

"Chop your own wood, and it will warm you twice."

-Henry Ford

Hi,  My instructions say to use the "provided plastic feeler gauge" which is .030" thick.  It further says that some kits have stationary modules that do not require adjustment of the air gap.  While you're at it, be sure you have a ground wire from the breaker plate to the distributor housing.  Good luck, Nick Brann - K.C., MO

Nick is right .030 is what mine say also from 4-5 years ago.

Michael

Sandy Valley, NV

The .030 feeler gauge they provide is plastic.  It is difficult to use a steel gauge due to its being magnetically drawn to one side.  Dont know but the steel feeler might be another killer .

Mike, located in the Siskiyou mountains, Southern, OR 292 powered 1946 Ford 1/2 ton, '62 Mercury Meteor, '55 Country Squire (parting out), '64 Falcon, '54 Ford 600 tractor.

63 If it would help and you need it, I can mail you a plastic gauge.  Should be there in 2-3 days. 

Mike, located in the Siskiyou mountains, Southern, OR 292 powered 1946 Ford 1/2 ton, '62 Mercury Meteor, '55 Country Squire (parting out), '64 Falcon, '54 Ford 600 tractor.

Can use a piece of cardboard.  Have heard the a metal feeler guage will cause trouble the the electronics..  Just food for thought!!   God Bless   Eddie

Eddie

Lake Forest, Ca. 92630

Brass feeler gauges are also an option.  I have serveral of varying sizes that are included with the steel feeler gauge sets.

Lorena, Texas (South of Waco)