Going to installed A/C this winter need a double sheave water pump pulley/ this is on a 55 vic 292 with power steering/ Not sure what will fit and line up right/I also need a double sheeve harmonic balancer /If anyone has these parts I sure would like to buy them

I'm not sure, but didn't the 302-332 y block have a double sheave pulley. You could always check out later engines, like the SBF & FE. Maybe someone else here has done this before and will chime in.

Dan      Kingman Az.      86409

Kansas;      I have a double pulley balancer I'd sell.It's got a little wear on the seal surface,but I used it on an engine for a while and it didn't leak.Repair sleeves are available from NAPA.

$40.00 plus shipping.Let me know if you're interested.

ph101842@yahoo.com

 

Paul,

Boonville,MO

This is a "MOTA PERFORMANCE" two groove, 6 inch diameter for a 289/302. The "front" groove ends up pretty much in line with the y-block 7 inch OD pulley. Fits on a 5/8 pump shaft and has the same bolt pattern as the Y pump flange. If a different alignment is needed - you could use a spacer under the pulley to move it out one space - so long as the spacer includes a nub to hang the fan on.

                  

I found the best price for them through an Amazon search.

 
 Steve Metzger       Tucson, Arizona