Whats the general interest in the Y-Block valve cover decals? Should I make the current decal smaller and remove the extra text? What size do you think would be best? Chuck

I'm moving this post to "this and that" to discuss the decals!

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

I would be interested in a vlave cover decal Chuck, and yes without the extra text would be good.

Rob

I love the smell of burning rubber in the morning!

Put me down for 2 sets, Chuck. I think just the logo without the text works. Regarding size, I guess as big as you can make it without the design running into the scallops or overhanging the inboard side too much.

Put me down for a few sets Chuck. Wish someone would do up some sew on patchs, I may copy the design and check with a couple of local embroidery shops and see if they can be done in a small quanity and still be affordable.

Glen Henderson



Freedom is not Free

Letohatchee, AL

Overseas is the way to go but the minimum will have to be determined. Let me do some checking. Sleeve or back patch? Or both? Chuck

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

I was thinking patches for over the pocket of my work shirts, but a back patch would be nice too. The ones that Lon and Lynn have  are real nice, but those shirts ain't made for working. Check into it and let us know. You are right off shore would be cheaper, and that is where the shirts are made anyway.

Glen Henderson



Freedom is not Free

Letohatchee, AL

Chuck.  I’m interested in a couple sets of valve cover decals also.  I'll opt for no text.

Lorena, Texas (South of Waco)

Ted,

When you worked up the valve cover drawings you posted did you do them to scale? If so what is the dimension of the Y-Block logo that fits above the scallops? That looks like a near perfect size. Chuck

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

The drawings are done to scale.  Comparing the decal length to the scallops should give you an idea of the actual length.  If you need the actual picture of the decal, just give a shout and I'll email it to you in a PowerPoint format.  Jim reconfigured the picture to a usable format and sent it to me so I could stretch and move it around and I can also send this to you if desired.

Lorena, Texas (South of Waco)

What is the decal you guys are talking about. First I heard of it when it went up here.

54 Victoria 312;  48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ