Can anyone tell me what rear end I have here? I bought it as an 8", but from what I've read about the bottom bolts

it looks like a 9".

Thanks

Butch "In a world filled with stress it is better to give than to receive"

Butch,



I'm going to have to agree with you, that carrier sure looks more like a 9" than a 8". I have an 8" in my Wagon and I just peeked under (nothing else to do, right?) and the lower pinion area doesn't overhang the bottom bolts like that.

"The Master Cylinder"

Enjoying life at the beach in SOCAL

Looks like a 9" to me. What vehicle was it removed from?

Glen Henderson



Freedom is not Free

Letohatchee, AL

Looks like a WAB 9 inch, nothing special.

Ford 9 inch.



If you look on the axle part of housing on the forward side to the left of the pumpkin you should see some numbers stamped in there horizontally to the axle housing. That would be the ratio the rear end originally had.

Thanks guys.

Butch "In a world filled with stress it is better to give than to receive"