|
Group: Administrators
Last Active: 6 days ago
Posts: 7.4K,
Visits: 205.0K
|
Here's a pic of the heavy duty truck exhaust manifold gaskets with the valve cover shields. I started using these upon having a rash of exhaust manifolds crack or break upon after using the fibre gaskets that were being supplied with the rebuild kits. These gaskets greatly reduced the occurence of exhaust manifolds cracking on my end. This particular pair of gaskets are FelPro P/N MS-95003 but can likely be found in other brands also The top gasket shows the side that goes toward the head while the lower gasket shows the side that is placed against the exhaust manifold itself.
  Lorena, Texas (South of Waco)
|
|
Group: Forum Members
Last Active: 12 Years Ago
Posts: 1.2K,
Visits: 7.8K
|
These gaskets were used on trucks equipped with the Rams Horn exhausts to help shield the valve cover area from the high rising manifold.
Mike, located in the Siskiyou mountains, Southern, OR 292 powered 1946 Ford 1/2 ton, '62 Mercury Meteor, '55 Country Squire (parting out), '64 Falcon, '54 Ford 600 tractor.
|
|
Group: Forum Members
Last Active: 2 hours ago
Posts: 4.6K,
Visits: 37.8K
|
|