This project is far from being on my front burner but I have this additional information.

For those who have a rack fitted which is too light I am aware of these two solutions http://www.heidts.com/_uploaded_files/in-064.pdf which has already been mentioned and http://borgeson.com/instructions/899001.

I have bought in the adaptor plate which I mentioned earlier. The right hand drive aisin power steering box which is the mirror image of the one used the the borgeson kit was available in Australia in a Holden Jackaroo (1999) attached are photo's of the box with the adaptor plate attached.

cheers

Warren

Grizzly (Aussie Mainline)

Grizzly (10/2/2012)

---

Guy's,This project is far from being on my front burner but I have this additional information.

For those who have a rack fitted which is too light I am aware of these two solutions http://www.heidts.com/_uploaded_files/in-064.pdf which has already been mentioned and http://borgeson.com/instructions/899001.

I have bought in the adaptor plate which I mentioned earlier. The right hand drive aisin power steering box which is the mirror image of the one used the the borgeson kit was available in Australia in a Holden Jackaroo (1999) attached are photo's of the box with the adaptor plate attached.





cheers

Warren

Warren, yes previously that great compact long sector box was in the old toyota cressidas and crown, i used them to convert 65 T bird to RHD, they are long gone so good to know they are in something more available here. I like the plate bolted to s/box, i had seen some similar adaption offered but plate was welded to box and that makes me nervous.

  AussieBill            YYYY    Forever Y Block     YYYY

 Down Under, Australia