Y block clutch?

Posted By Trevwood 13 Years Ago

You don't have permission to rate!

Author	Message
Trevwood	Posted 13 Years Ago
Normally aspirated Group: Forum Members Last Active: 9 Years Ago Posts: 25, Visits: 245	Just wondering what clutch will fit between my 272 and 3 speed manual? Being in Australia I'm hoping for an easy off the shelf item, thanks, Trev. Searched the forum but can't find an answer.
	Reply Quote
Reply
Trevwood	Posted 13 Years Ago
Normally aspirated Group: Forum Members Last Active: 9 Years Ago Posts: 25, Visits: 245	Thanks for the link Warren, sounds like the cusso box isn't worth the hassle! When you say early Toploader what year is an early one? Cheers, Trev.
	Reply Quote

Threaded View

Y block clutch? By Trevwood ( 13 Years Ago )

Trevwood; Since no one responded, I'll give it a shot. You have to... By Rono ( 13 Years Ago )

Trevwood. In Australia Customline are reasonably rare and most now... By Grizzly ( 13 Years Ago )

From memory, the clutch you need is out of a XT XW 3speed V8 clutch.... By rick55 ( 13 Years Ago )

Cheers for the replies, I nearly gave up;)

My box is a... By Trevwood ( 13 Years Ago )

Measure the wear pattern where the clutch disc rides on the flywheel. By lowrider ( 13 Years Ago )

Take the flywheel to repco and they will match the clutch to the... By rick55 ( 13 Years Ago )

[quote][b]rick55 (11/26/2012)[/b][hr]Take the flywheel to repco and... By Trevwood ( 13 Years Ago )

Thanks for that Rick. By Trevwood ( 13 Years Ago )

Thanks for the info Grizzly.
I won't just be sticking anything... By Trevwood ( 13 Years Ago )

Warren, you are right about the gearbox I am using. When I first fit... By rick55 ( 13 Years Ago )

Rick, There are obviously more than one cusso gearbox so shaft and... By Grizzly ( 13 Years Ago )

I presume you found something like this.... By rick55 ( 13 Years Ago )

Rick & Trev, Here it is customline gearboxs have a 1" dia input... By Grizzly ( 13 Years Ago )

Early top loaders will set you back more than the clutch you are... By rick55 ( 13 Years Ago )

I'm onto a 3 speed toploader, clutch, bell etc complete out of a 65... By Trevwood ( 13 Years Ago )

That gearbox should work fine. Take your clutch plate with you as... By rick55 ( 13 Years Ago )

Trev & Rick, My point from earlier was to make sure you use the... By Grizzly ( 13 Years Ago )

Top loaders are a very strong box. The standard Cussy box is a good... By rick55 ( 13 Years Ago )

So not being fortunate enough to live in Australia, what is a cussy... By jrw429 ( 13 Years Ago )

[quote][b]jrw429 (12/2/2012)[/b][hr]So not being fortunate enough to... By Grizzly ( 13 Years Ago )

[quote][b]Grizzly (12/2/2012)[/b][hr][quote][b]jrw429... By aussiebill ( 13 Years Ago )

Glad I asked, I wouldn't have guessed that! So a cusso 3 speed is the... By jrw429 ( 13 Years Ago )

Yep, in Oz we didn't get the variants you got in the states. So we... By rick55 ( 13 Years Ago )

[quote][b]rick55 (12/3/2012)[/b][hr]Yep, in Oz we didn't get the... By aussiebill ( 13 Years Ago )

Ok, thanks :) By Trevwood ( 13 Years Ago )