Where to bolt sparkplug wires bracket

Where to bolt sparkplug wires bracket

Home
»
Keeping The Dream Alive!
»
Technical

http://209.208.111.198/Topic11373.aspx

Print Topic | Close Window

By timmy4 - 17 Years Ago

I bolted the bracket for the plug wires on the left side of the engine to a bolthole behind the head before I put the engine in but I am trying to figure out where the right side brack is supposed to bolt to. I tried the rear exhaust manifold bolt but that did not seem to work out too hard to get a wrench on the bolt with the bracket there.

By oldcarmark - 17 Years Ago

Timmy,There is a threaded place on intake manifold just near the coil bracket mounting holes at the back of manifold This is for the "long'bracket.The smaller bracket bolts on like the left side.Down near the exhaust manifold.Regards Mark

By charliemccraney - 17 Years Ago

Here's a photo that might help. Not stock brackets, but stock locations.

The ones with the square grommets mount on a boss at the rear of the block, just below the rear head bolt. One of the rectangular ones mount to the right of the distributor (viewed from the front of the engine) to a boss on the block. The other mounts to the rear most bolt on what is essentially the intake surface of the left head. You will probably have to remove the distributor to get at this one.

By Moz - 17 Years Ago

g'day charlie

timmy cant see your picture he's blind full credit to him for what he has achieved so far some people have trouble working on y blocks even with two eye's & i love the look of your engine. moz.