I just hauled home a used 292 truck engine from a 64 F-250 that had a 4 speed.
My question is I would like to use my current 3 speed toploader from my 223 six, to go back into my 64 F100. Will it mate up to the 292 bell?
I haven't tried any fitting yet. Any Advice? Will the input shaft be correct?
Any help would be appreciated. thanks.
I was planning on updating the flywheel clutch setup too.

       A  L  A  N   F  R  A  K  E  S   ~  Tulsa, OK    

Alan the four speed bell will not bolt to the three speed trans, but if you can't find a three speed housing local let me know. If you will pay shipping, I can fix you up.

Glen Henderson



Freedom is not Free

Letohatchee, AL

Thnka Glenn, I will keep that in mind. So the 4 speed bell is different pattern? What else ight be different.?
I was toldmy six cylinder bell would not bolt up to th 292 either. Right?

       A  L  A  N   F  R  A  K  E  S   ~  Tulsa, OK    

So what I really should be asking is what would the part # for that bell housing be?

       A  L  A  N   F  R  A  K  E  S   ~  Tulsa, OK    

Alan, this might help. Don't forget if you have 57-60 truck you will need the bellhousing with slave cylinder mount. TAAK 7505-B

CASTING NUMBER	6cylinder or Y-Block	3 SPEED OR 4 SPEED	OKAY FOR CONVERSION
TAAA-7505-A	54-55 (I-6) TRUCK	3 speed	53-56 and 61-64 trucks
TAAK-7505	54-56 (I-6) TRUCK	3 speed	won't work 57-60 trucks
TAAK-7505-B	57-64 (I-6) TRUCK	3 speed	Okay all years 6 cylinder Truck
TAAB-7505	54-56 V8 TRUCK	3 speed	Okay 54-56 and 61-64 Truck
TAAM-7505A	57-60 V8 TRUCK	3 speed	Okay all years Y-Block Truck
TAAM-7505B	61-64 V8 TRUCK	3 speed	Okay all years Y-Block Truck

http://ford-y-block.com 

20 miles east of San Diego, 20 miles north of Mexico

Alan, I don't have a # handy, but I don't think the 6 cyl will bolt to the V8.But after looking at the chart that John just posted, I may be wrong. If you look at the 6 cyl bell along side the V8 four speed bell, it is easy to see the difference. The center hole is larger on the four speed and the bolt pattern where the trans bolts up is wider apart.

Glen Henderson



Freedom is not Free

Letohatchee, AL

OK thanks guys, it looks like the one I need is TAAM-7505B.
My F100truck is a 64.

Glenn, if you have one let me know. And I will get with you.

John, thanks for your chart!!.

       A  L  A  N   F  R  A  K  E  S   ~  Tulsa, OK    

Alan, I have one that I just pulled from a 64 pickup, give me your ship to address and I will see what it will cost to ship.

Glen Henderson



Freedom is not Free

Letohatchee, AL

4184 S. Birmingham Place
Tulsa, OK 74105

       A  L  A  N   F  R  A  K  E  S   ~  Tulsa, OK    

I will get it in the mail in the next day or two.

Glen Henderson



Freedom is not Free

Letohatchee, AL