Working on a 1960 292 and bought the Fel Pro FS 7999 PT 3 kit and can't identify some of the gaskets and want to make sure I use the proper ones. I think all of these are for the oil pan and pump area, but not positive. The two copper ones fit the pickup thru pan location, but were not on what was removed. The three hole one doesn't look familiar. The nylon and one with tits appear to be the oil drain, no clue on the rubber one, or the concave paper type one. Teh square one looks to be for the dipstick but haven't verified. Thanks

The four hole and six hole gaskets are for the early model truck oil pans that have the two piece oil pickup tube assemblies.  The two pieces bolt together at the oil pan with the gaskets on each side of the oil pan.

Lorena, Texas (South of Waco)

Ted,

Could you be more specific about the photo attached to his post? The six circular washers on the bottom left, right to left, top to bottom, 1,2,3 on the top and 4,5,6 on the bottom.
 
Top Row: #1 (white) and #2 (black) both fit the pickup tube but not sure what they do or where they go. #3 (grey) has four points in the inside circumfurance, no clue about it or where it might go.

Bottom Row #4 (copper) appears to fit on the pick up tube, #5 (flat copper) could be for inside of pan where pick up tube exits side of pan but also fits oil drain plug, #6 some kind of nylon or fiber with a small lip on inside fits oil drain plug and also fits pickup tube connection to oil pan.

I assume oil pan kits include a washer for the oil pan drain plug.

Darrell Howard Whitefish, MT Outlaw 56 Ford F-100's