|
Group: Forum Members
Last Active: 6 Years Ago
Posts: 650,
Visits: 2.7K
|
short of jamming a screw driver into the canister and trying to unscrew it that way, does anyone have another suggestion?
...don't have an oil filter wrench that will close down far enough to grab it.
|
|
Group: Forum Members
Last Active: Last Year
Posts: 1.3K,
Visits: 80.0K
|
Mark;
You can try a "Channel Lock", but be careful not to crush the canister. Also, you can try a rubber strap wrench which are used in the kitchen for opening jars. Those work pretty well.
Rono
 Ron Lane, Meridian, ID
|
|
Group: Forum Members
Last Active: 10 Years Ago
Posts: 118,
Visits: 7.9K
|
Mark,
If you have an old leather belt which has "shrunk" - several of mine have - cut it a little lager than the circumference and grab the "tabs" when you wrap it around with vice grips or channel locks.
Jim
Norfolk, VA
"MABLE"
1956 Thunderbird Green / Brown Interior (ZE-XG)
"MEAN GREEN"
1956 Mainline (FG-BE)
|
|
Group: Forum Members
Last Active: 6 Years Ago
Posts: 650,
Visits: 2.7K
|
will try both; thanks.
wait, all my belts have shrunk... am I doing something wrong here!
"God Bless Texas"location: Houston,TX
|
|
Group: Forum Members
Last Active: 6 Years Ago
Posts: 650,
Visits: 2.7K
|
have old leather belt, don't have enough "grunt" to unscrew the filter canister...
more on that later.
"God Bless Texas"location: Houston,TX
|
|
Group: Forum Members
Last Active: 8 hours ago
Posts: 3.6K,
Visits: 497.6K
|
I use a strap wrench that I bought from Sears. Use it near the top, less chance of doing any harm.
54 Victoria 312; 48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ
|
|
Group: Forum Members
Last Active: 6 Years Ago
Posts: 650,
Visits: 2.7K
|
one strap wrench from Sear Hardware later, canister removed and new filter installed!
best $7 spent lately.
Mark
"God Bless Texas"location: Houston,TX
|