• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• tranny shift

tranny shift

Posted By Threat51 11 Years Ago

You don't have permission to rate!

Post Reply

tranny shift

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
Threat51	Posted 11 Years Ago
Turbocharged Group: Forum Members Last Active: 10 Years Ago Posts: 30, Visits: 88	Hi I have a 56 mercury auto 2 speed.question is when it is drive is it suppose to shift?Or just stay in that gear.Only have drive and low on indicater. ThanksbBob
	Reply Quote

Threaded View

Threaded View

tranny shift By Threat51 ( 11 Years Ago ) The Fordomatic (or Mercomatic in your case) is actually a 3-speed... By oldave57 ( 11 Years Ago ) I don't think mine is doing that 70 mph is when it shifts?is there a... By Threat51 ( 11 Years Ago ) You can adjust the length of the rod between the bellcrank on the... By Hoosier Hurricane ( 11 Years Ago ) [quote][b]oldave57 (8/12/2014)[/b][hr] In the "good old days" when we... By lyonroad ( 11 Years Ago ) According to the above chart, under light throttle it should be in... By Hoosier Hurricane ( 11 Years Ago ) So I back off the kick down lever 1 full turn ? Lol I don't no what... By Threat51 ( 11 Years Ago ) Do they just seem to run at higher rpm? Mabe it is shifting and I... By Threat51 ( 11 Years Ago ) [quote][b]Threat51 (8/13/2014)[/b][hr]Do they just seem to run at... By charliemccraney ( 11 Years Ago ) Not sure on rpm I guess I'll pick up a tack to see just where I'm at.... By Threat51 ( 11 Years Ago ) Also, if you ":Floor it" when stopped it will automatically go into... By paul2748 ( 11 Years Ago ) The following shift point information is from a Fordomatic shop manual... By oldave57 ( 11 Years Ago ) So it should shift into the finel gear about 35 mph or 40. Do I have... By Threat51 ( 11 Years Ago ) Follow Hoosier's advice and take a look at that shaft that is... By Daniel Jessup ( 11 Years Ago ) re shift points.Go to a library and get hold of a motors repair... By 2721955meteor ( 11 Years Ago ) Ok so if I don't think it is shifting I shorton the rod is thar... By Threat51 ( 11 Years Ago ) Just remember that bell crank can have a mind of its own if not... By Talkwrench ( 11 Years Ago ) If it is not shifting, INCREASE THE LENGTH of the rod. This will mean... By Daniel Jessup ( 11 Years Ago ) [quote][b]Daniel Jessup (8/14/2014)[/b][hr]If it is not shifting,... By oldcarmark ( 11 Years Ago ) Thanks if it's easy to get at I might check that out before I adjust... By Threat51 ( 11 Years Ago ) [quote][b]Threat51 (8/19/2014)[/b][hr]Thanks if it's easy to get at I... By snowcone ( 11 Years Ago ) the throtle presure is the key to transmition not failing.if the rod... By 2721955meteor ( 11 Years Ago ) Don't think it's shifting 3000 rpm at 55 ? By Threat51 ( 11 Years Ago ) The shifts are also controlled by the governor and if this sticks then... By snowcone ( 11 Years Ago ) My 56 shifts into high from 2nd right at 15 when I'm crusin' in town.... By DryLakesRacer ( 11 Years Ago )

Post Reply

Back To Top

Reading This Topic