Profile Picture

RPM to high

Posted By Threat51 11 Years Ago
You don't have permission to rate!

RPM to high

Author
Message
Threat51
Posted 11 Years Ago
View Quick Profile
Turbocharged

Turbocharged (64 reputation)Turbocharged (64 reputation)Turbocharged (64 reputation)Turbocharged (64 reputation)Turbocharged (64 reputation)Turbocharged (64 reputation)Turbocharged (64 reputation)Turbocharged (64 reputation)Turbocharged (64 reputation)

Group: Forum Members
Last Active: 10 Years Ago
Posts: 30, Visits: 88
Hey guys I have a 1956 mercury 312 eng didn't think my tranny was going in to high gear hears what I got used tack and gps for speed at 55! I was at 3000 rpm .At lower speed was watching tack no fluctuation in rpms thinking its in second ? Need help .

Threaded View

Threaded View
Forum Post RPM to high By Threat51 ( 11 Years Ago )
Forum Post If you can give us the actual tire diameter and the rear axle ratio,... By Hoosier Hurricane ( 11 Years Ago )
Forum Post If you are really going 55 MPH and your tack is reading right you are... By Pete 55Tbird ( 11 Years Ago )
Forum Post I believe you are correct that 3000 RPM is too high for 55 MPH, but it... By oldave57 ( 11 Years Ago )
Forum Post Will get tire size tommrow. I also adjusted the linkage as the manual... By Threat51 ( 11 Years Ago )
Forum Post Dave you are on with the rpms that's about what I am at. Bob By Threat51 ( 11 Years Ago )
Forum Post Pete what gear would I be in? By Threat51 ( 11 Years Ago )
Forum Post I hate to belabor the obvious but is the rear end original to the car?... By steinauge ( 11 Years Ago )
Forum Post As far as I no its the original rear end . The tires are 215-75-15... By Threat51 ( 11 Years Ago )
Forum Post [quote][b]Threat51 (8/27/2014)[/b][hr]Manual says the gears are for... By charliemccraney ( 11 Years Ago )
Forum Post With the original Fordomatic, if you place it in Dr, and then pull... By Daniel Jessup ( 11 Years Ago )
Forum Post I have not felt a shift and the tack never drops off at all you would... By Threat51 ( 11 Years Ago )
Forum Post [quote][b]Threat51 (8/27/2014)[/b][hr]I have not felt a shift and the... By Daniel Jessup ( 11 Years Ago )
Forum Post I agree but how do I fix that. By Threat51 ( 11 Years Ago )
Forum Post One thing to bear in mind:The speedometers in mid-50s Fords are... By PWH42 ( 11 Years Ago )
Forum Post I had my gps hooked up that's how I got the 55 mph. By Threat51 ( 11 Years Ago )
Forum Post I still think I'm am not getting a shift By Threat51 ( 11 Years Ago )
Forum Post ( I have not felt a shift and the tack never drops off at all you... By Pete 55Tbird ( 11 Years Ago )
Forum Post Pete Hers what I got at 15 in L it reads 1200 rpms At 15 to 20 put in... By Threat51 ( 11 Years Ago )
Forum Post It sounds like you have pretty good evidence that the 2-3 shift is not... By oldave57 ( 11 Years Ago )
Forum Post [quote][b]oldave57 (8/28/2014)[/b][hr]It sounds like you have pretty... By aussiebill ( 11 Years Ago )
Forum Post Ok thanks aussiebill I guess I'll give that a try and hopefully that... By Threat51 ( 11 Years Ago )
Forum Post you can get the comp govoner out by jacking the rear of car real... By 2721955meteor ( 11 Years Ago )
Forum Post I have only owned the car a few months and didn't think it was... By Threat51 ( 11 Years Ago )
Forum Post if the govoner asembly was instaled backwerds you can not chang that... By 2721955meteor ( 11 Years Ago )
Forum Post [quote][b]2721955meteor (8/30/2014)[/b][hr]if the govoner asembly was... By 2721955meteor ( 11 Years Ago )
Forum Post Hi cliff sent you email don't no if it went could use pic. My email is... By Threat51 ( 11 Years Ago )
Forum Post sent 2 pictures,cliff By 2721955meteor ( 11 Years Ago )
Forum Post [quote][b]2721955meteor (9/3/2014)[/b][hr]sent 2 pictures,cliff... By 2721955meteor ( 11 Years Ago )


Reading This Topic

Site Meter