heat risers

Posted By steinauge 11 Years Ago

You don't have permission to rate!

Author	Message
steinauge	Posted 11 Years Ago
Supercharged Group: Forum Members Last Active: 10 Years Ago Posts: 143, Visits: 1.4K	I am going to change the intake manifold on my 292.the intake I am installing is a "B" suffix 1X4.I have been unable to get any of the Victor gaskets with the blocked heat risers so I fabricated 2 1\4" thick aluminum plugs that fit tightly into the heat riser openings in the manifold.any reason this wont work?
	Reply Quote

Threaded View

heat risers By steinauge ( 11 Years Ago )

Thank you.I live in Florida where we get lots of damp,but not much... By steinauge ( 11 Years Ago )

I have a 3x2 set up and was havin issues with carb heat soak, I fabbed... By Riz ( 11 Years Ago )

I bought my restricted intake gaskets from Larry's T-Bird and... By DryLakesRacer ( 11 Years Ago )

Tee Bird Products sells a good intake manifold set with restricted... By tarheel ( 11 Years Ago )

Most of the TBird suppliers have the restrictive intake manifold... By paul2748 ( 11 Years Ago )

As I understand it, the restricted (smaller ) hole gaskets were... By PF Arcand ( 11 Years Ago )

I have been driving the car with the blocked risers and it runs... By steinauge ( 11 Years Ago )

Best Gaskets makes the gaskets with the small heat opening. By paul2748 ( 11 Years Ago )