Hi:  My '57 Ford Tudor Ranch wagon had both front fenders replaced with NOS fenders in the distance past by a previous owner and the "Ranch Wagon" scripts were not reinstalled.  I've removed the old paint and found no holes in either fender that would indicate the scripts ever existed (probably because the fenders were NOS).  I've finally found a nice set of "Ranch Wagon" scripts that I want to mount on the fenders, but I can't do much until I can get some accurate measurements and coordinates to I make sure I get them positioned correctly on the fenders.  I'm hoping that someone here can take measurements for me off their Tudor Ranch Wagon that I can use for this project.  The measurements should be fairly easy to get using the vertical reveal between the rear of the fender and the front of the door, and the horizontal reveal at the top of the fender and the edge of the hood.  The distance from these two points to the side and top of the "R" in "Ranch Wagon" should do the trick.  And of course if anyone has an actual template I could use, that would be incredible.  Thanks for any help I can get!  Ron...

Probably best to ask this question over on 57Fordsforever.com. They're the experts on 57's.

Dan      Kingman Az.      86409

Dan--Thanks for that.  I just posted the question there, but I'll continue to check back here for suggestions.  Ron...