regarding the hubcentric issue.  Most aftermarket wheel I have run across are not hubcentric.  I have been using aftermarket wheels for more years than I want to admit and never had a problem with them.


54 Victoria 312;  48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ

Any parts store which carries Dorman parts can supply what you want . They can look up the stock one to get the proper end where it fits the hub and then look up longer ones with that end. I've done it for an early Pontiac. If you get the part # they would be available in larger quantities on the net. Good luck

56 Vic, B'Ville 200 MPH Club Member, So Cal.

in a situation like this how do you guys deal with the "hubcentric / lugcentric" issue ?
 
I'm using a 1/2" spacer on the front to give clearance for a disc brake conversion so I am effectively lug centric. with no issues. I have since discovered people who make spacers with a stub to restore hub centric.  any comments?
 
stuey

I had a set of spacers and the longer studs on my wagon. I'm not using them anymore if your interested send me a pm.

Durham Missouri

Thanks for the clarification Danny, your right, I have the stock steel wheels.
Rowen

Rowen
55CV
Woodland, Ca

Any parts store should have them, you can use amer to remove the old ones.

I have true wire wheels - not stock rims - and clearance between my 670x15 bias ply tires and the upper control arm ball joint is less than 0.25 inch. Even if I installed the same 670x15 new tire, I would want to move the tire out to get more clearance, so I am installing the spacers and I want longer studs to get all of the lug nut seated. 

You should be able to get longer studs through Jegs or Summitt.  Racers use longer studs and those companies should stock them.


54 Victoria 312;  48 Ford Conv 302, 56 Bird 312
Forever Ford
Midland Park, NJ

Around here, most big tire stores have them, as do most auto parts stores. Untrained people with an impact wrench strip a lot of them. Press an old one out and take it with you. Ask to see the box, and avoid offshore stuff.

Trying to clear the upper ball joint?

miker
55 bird, 32 cabrio F code
Kent, WA
Tucson, AZ

Forgive my ignorance but Why do you need the spacers for radial tires? I put radials on my 55CV and they fit just fine. I even have much lower coils on it.
Rowen

Rowen
55CV
Woodland, Ca