2017 Engine Masters Vintage Rules

Posted By Vic Correnti 8 Years Ago

You don't have permission to rate!

2017 Engine Masters Vintage Rules

Author	Message
Vic Correnti	Posted 8 Years Ago
Supercharged Group: Forum Members Last Active: 7 days ago Posts: 346, Visits: 12.2K	Someone doesn't like the Y-Blocks winning two years in a row with aluminum heads so they are not allowed this year. If theY's win again this year out goes the stacked ports too. Vic Correnti
	Reply Quote

Threaded View

2017 Engine Masters Vintage Rules By Vic Correnti ( 8 Years Ago )

Rules:... By charliemccraney ( 8 Years Ago )

At least the Oldsmobile folks can't use the aluminum head, either. I... By Joe-JDC ( 8 Years Ago )

[quote][b]Joe-JDC (2/24/2017)[/b][hr] At least the Oldsmobile... By LordMrFord ( 8 Years Ago )

[quote][b]LordMrFord (2/25/2017)[/b][hr] [quote][b]Joe-JDC... By Joe-JDC ( 8 Years Ago )

[quote][b]Joe-JDC (2/25/2017)[/b][hr] [quote][b]LordMrFord... By LordMrFord ( 8 Years Ago )

Maybe somebody will talk John into casting some iron heads! By pegleg ( 8 Years Ago )

That wouldn't work because the rules specify OEM cast iron heads. I... By charliemccraney ( 8 Years Ago )

What about mating Windsor or Cleveland oem-heads with Y, custom... By LordMrFord ( 8 Years Ago )

That wouldn't work either. From the rules "OEM cast iron cylinder... By charliemccraney ( 8 Years Ago )

[quote][b]charliemccraney (2/25/2017)[/b][hr] That wouldn't work... By LordMrFord ( 8 Years Ago )

Hi gang. I'm very proud of you guys and the Y-block Engine Masters... By HenryFloored ( 8 Years Ago )

Is furnace brazing allowed? I seen some pretty Exotic modifications... By Small block ( 8 Years Ago )

I'd rather not see furnace brazing myself. I'd rather see Ford's... By HenryFloored ( 8 Years Ago )

[quote][b]Small block (3/2/2017)[/b][hr] Is furnace brazing... By Joe-JDC ( 8 Years Ago )

Thanks joe I understand the rules now. As for the Y block holding... By Small block ( 8 Years Ago )

It would be awesome to show up with an iron headed engine and still... By charliemccraney ( 8 Years Ago )

any flow figures on the 430 merc. heads! intakes should be great but... By yalincoln ( 8 Years Ago )

Actually after removing the EGR hump out of the exhaust passage, and... By Joe-JDC ( 8 Years Ago )

That is a real good balance between the intake and exhaust what kind... By Small block ( 8 Years Ago )

I could tell you, but there are a couple of MELs entered in this... By Joe-JDC ( 8 Years Ago )

[quote][b]Small block (4/11/2017)[/b][hr] That is a real good... By Joe-JDC ( 8 Years Ago )

What is the RPM limit for the class? You think a stroked Edsel... By Small block ( 8 Years Ago )

In 2002 John Mummert freshened-up the motor in my '56 T-Bird drag car.... By tbirddragracer ( 8 Years Ago )

looks like a Lincoln Y might be a better choice! By yalincoln ( 8 Years Ago )

Reading the paragraph about repairing ports restrictions makes me a... By MoonShadow ( 8 Years Ago )

Chuck. Maybe in 2015 John Kaase told them they were Re-Manufactured... By NoShortcuts ( 8 Years Ago )

The rules change yearly. Was that also in the 2015 rules? By charliemccraney ( 8 Years Ago )

The cylinder head rule for 2015 and 2016 for the Vintage Engine class... By Ted ( 8 Years Ago )

So I'm sure I'm not alone when I say that maybe the Y-block port... By HenryFloored ( 8 Years Ago )

Another advantage to the stacked port layout not commonly mentioned... By Ted ( 8 Years Ago )

I like the new rule Let the chips fall were they may and we will... By Small block ( 8 Years Ago )

[quote][b]Small block (3/5/2017)[/b][hr] I like the new rule... By Joe-JDC ( 8 Years Ago )

If all the engines were restricted to as cast, I would bet they... By Small block ( 8 Years Ago )

According to James Eickman's 1984 book on the Y-Block engine, Allan... By PF Arcand ( 8 Years Ago )

Is that only ONE repair of modification on all of the ports or just... By MoonShadow ( 8 Years Ago )

[quote][b]MoonShadow (3/7/2017)[/b][hr]Is that only ONE repair of... By Ted ( 8 Years Ago )

An aside on the flow capability of original heads. When John Mummert... By PF Arcand ( 8 Years Ago )

I just flowed a set of mint -G heads with 1.925/1.510" valves, and... By Joe-JDC ( 8 Years Ago )

Joe. Thanks for the detailed flow information on the various heads... By Ted ( 8 Years Ago )

[quote][b]Ted (3/30/2017)[/b][hr] Joe. Thanks for the detailed... By Small block ( 8 Years Ago )

[quote][b]Small block (4/2/2017)[/b][hr]Ted just curious Why is the... By Ted ( 8 Years Ago )

The rule change doesn't surprise me. If Ford keeps winning in NASCAR... By lowrider ( 8 Years Ago )

They make exceptions for less known, less used engines. The Mopar... By charliemccraney ( 8 Years Ago )

I'm sure it has nothing to do with preventing Ford from reaching the... By charliemccraney ( 8 Years Ago )

hi ted! it doesn't say if porting the heads is allowed? I would think... By yalincoln ( 8 Years Ago )

[quote][b]yalincoln (4/5/2017)[/b][hr]Hi Ted! It doesn't say if... By Ted ( 8 Years Ago )

thanks ted, good luck! By yalincoln ( 8 Years Ago )

An early hemi will be interesting. In past competitions, they really... By charliemccraney ( 8 Years Ago )

3700 - 6300 for the scoring By charliemccraney ( 8 Years Ago )

Hi guys, to be honest with you this post is to stir the pot a little... By HenryFloored ( 8 Years Ago )

Henry. As far as I know, there are at least two MEL engines being... By Ted ( 8 Years Ago )

Is variable lenght or dual plenum intake manifolds legal? By LordMrFord ( 8 Years Ago )

Hey Ted, thanks for the input. (BTW I'm the guy that bought the heads... By HenryFloored ( 8 Years Ago )

I am the proud owner of a Y Block in my 56 Ford, and someday hope to... By Kahuna ( 8 Years Ago )

It's been awful quiet out there. The EMC event is October 2 - 6 this... By NoShortcuts ( 8 Years Ago )

There have been a couple of drop outs in the Vintage Engine Class.... By Ted ( 8 Years Ago )

Ted, Where'd the rocker arms come from? By pegleg ( 8 Years Ago )

Well guys I'd like to put my 2 cents in, and that's about what it's... By HenryFloored ( 8 Years Ago )

Greetings to all: Like the Ford Y-block, the M E L engine is of... By FORD DEARBORN ( 8 Years Ago )

[quote][b]pegleg (9/23/2017)[/b][hr]Ted, Where'd the rocker arms come... By Ted ( 8 Years Ago )

God luck to all and may the ford gods shine! I too was born in 61 and... By Y block Billy ( 8 Years Ago )

My M-E-L EMC entry is not going to make it for the scheduled running... By Ted ( 8 Years Ago )

hey ted! did you get any pulls at all for hp and tq? By yalincoln ( 8 Years Ago )

[quote][b]yalincoln (10/20/2017)[/b][hr]hey ted! did you get any pulls... By Ted ( 8 Years Ago )

thanks Ted! great numbers! sorry you missed the big show! there's... By yalincoln ( 8 Years Ago )

[quote][b]yalincoln (10/24/2017)[/b][hr]Thanks Ted! Great numbers!... By Ted ( 8 Years Ago )

thanks ted! beaytiful engine! By yalincoln ( 8 Years Ago )

After the EMC completion Kaase mentioned that he thought with a bigger... By RB ( 8 Years Ago )

Yessa! By Y block Billy ( 8 Years Ago )

Sorry to here that Ted. It must be disappointing for you. By ian57tbird ( 8 Years Ago )

Jeez Ted, I'm VERY sorry to hear that! We need builders like you in... By Rowen ( 8 Years Ago )

Awe, sad to hear! By Y block Billy ( 8 Years Ago )

Oh darn it Ted that's tough luck. I'm sorry to hear this after all... By HenryFloored ( 8 Years Ago )

Just a quick update. Disassembled the engine and pulled all sixteen... By Ted ( 8 Years Ago )

Looks like they are starting to post results. I don't think they are... By MplsMike ( 8 Years Ago )

One of the hemi's was vintage, and produced an excellent score. I... By charliemccraney ( 8 Years Ago )

There's a video on facebook showing the Jon Kaase entry. Interesting... By charliemccraney ( 8 Years Ago )

Royce's Lincoln... By charliemccraney ( 8 Years Ago )

Charlie. Your facebook link does not work for me. Can you provide a... By Ted ( 8 Years Ago )

Here is a link to the hot rod site... By MplsMike ( 8 Years Ago )

Ted, I can't find other links. Search for Hot Rod Magazine on... By charliemccraney ( 8 Years Ago )

I see on the Hot Rod site, the Jon Kasse/Royce Brechler entry had 769... By pintoplumber ( 8 Years Ago )

Torque didn't drop below 630. I think it produced 715 ftlbs. He said... By charliemccraney ( 8 Years Ago )

If you've watched the Facebook videos, you may have noticed that one... By charliemccraney ( 8 Years Ago )

does anyone have the final numbers? By yalincoln ( 8 Years Ago )

what happened at the engine masters! what were the results? thanks! By yalincoln ( 8 Years Ago )

Here is a link to the vintage class winner.... By HenryFloored ( 8 Years Ago )

That's impressive. By charliemccraney ( 8 Years Ago )

Royce. Those are some really great numbers. Should power your... By Ted ( 8 Years Ago )

Post Reply

Reading This Topic