|
Group: Forum Members
Last Active: 8 Years Ago
Posts: 19,
Visits: 61
|
Just bought a running 292 . While pulling it down for overhaul found the cam gear is 180 degrees off. Been working on y-blocks for over 50 years have never seen this before. Any idea how this is possible.
|
|
Group: Moderators
Last Active: Last Week
Posts: 6.1K,
Visits: 442.9K
|
No. That is a common misunderstanding. It is with #6 at tdc on compression.
Lawrenceville, GA
|
|
Group: Forum Members
Last Active: 8 Years Ago
Posts: 19,
Visits: 61
|
Wow !! I can not believe I forgot that might be the case. Thanks.
|
|
Group: Forum Members
Last Active: Last Year
Posts: 1.3K,
Visits: 80.0K
|
Dave, I would trust Charlie's advice on this. He has helped me out many times! Rono
 Ron Lane, Meridian, ID
|
|
Group: Forum Members
Last Active: 8 Years Ago
Posts: 19,
Visits: 61
|
Thanks Ron. All the years I've worked on these y-blocks not sure I was aware of this. I lined the timing chain up then put everything together, set the motor in, then rolled #1 up and set the distributor in.
|