292 Y block with dual quad carter carbs stalls when trans is shifted in neutral.

Posted By Joe D 7 Years Ago

You don't have permission to rate!

292 Y block with dual quad carter carbs stalls when trans is shifted...

Author	Message
Joe D	Posted 7 Years Ago
Supercharged Group: Forum Members Last Active: 3 Years Ago Posts: 123, Visits: 84.9K	When engine is up to operating temp (180-195) and while driving around 50-65 mph, engine stalls when trans is placed in neutral. Seems like its starving for gas and not flooding. Does restart with foot to the floor and engine recovers and idles normal after a minute or so. Engine runs great otherwise and this only happens when engine is 180 degrees or higher 195. Vapor Lock in carbs due to ethanol maybe? Dual Quads (Carter) are off of a 1957 T -Bird I was told. Joe D (The Frig) 1960 F-100 - 292 Y-Block Philly Burbs
	Reply Quote

Threaded View

292 Y block with dual quad carter carbs stalls when trans is shifted... By Joe D ( 7 Years Ago )

'57 TBirds came with a pair of Holley carbs and had aluminum spacers... By Sandbird ( 7 Years Ago )

"Vapor Lock in carbs due to ethanol maybe?" When it does this, pull... By KULTULZ ( 7 Years Ago )

How would I check the accelerator pump? It does restart so I assume... By Joe D ( 7 Years Ago )

"How would I check the accelerator pump? It does restart so I assume... By KULTULZ ( 7 Years Ago )

OK I'll check next time it stalls to see if fuel bowl is dry. I have... By Joe D ( 7 Years Ago )

I forgot to mention that I did try insulating the fuel lines all the... By Joe D ( 7 Years Ago )

RE: 292 Y block with dual quad carter carbs stalls when trans is... By Joe D ( 7 Years Ago )

PERTRONIX- IGNITOR I has given problems IGNITOR II is a better option.... By KULTULZ ( 7 Years Ago )

Is there a 'sock' filter on the fuel pickup in your gas tank? Have you... By Lord Gaga ( 7 Years Ago )

There is not a sock filter. just a pick up tube. I installed a new... By Joe D ( 7 Years Ago )

Thanks Kultulz, I'm going to try get a tank of aviation gasoline (no... By Joe D ( 7 Years Ago )

I checked and the spacers are aluminum and the gaskets are steel. Do... By Joe D ( 7 Years Ago )

Steel gaskets? You sure? By charliemccraney ( 7 Years Ago )

It seems that way since a magnet would not stick to aluminum spacer... By Joe D ( 7 Years Ago )

Try this for gasoline- https://www.pure-gas.org/ By KULTULZ ( 7 Years Ago )

"Steel gaskets? You sure?" It must be those combination fiber/steel... By KULTULZ ( 7 Years Ago )

"Do they sell stock material that you can cut yourself. Should I make... By KULTULZ ( 7 Years Ago )

Your problem sounds like a vaccuum leak, not a fuel problem. By Lou ( 7 Years Ago )

The cartridge type filter is 10 micron and is installed back by... By Joe D ( 7 Years Ago )

Did anyone pick this up from the first post "Does restart with foot to... By kevink1955 ( 7 Years Ago )

Kevin, I thought if the fuel is boiling inside the carb bowls it would... By Joe D ( 7 Years Ago )

Usually when fuel boils off in the bowl it is pushed out the vents in... By kevink1955 ( 7 Years Ago )

That is a sharp looking pickup and engine detail. You have a braided... By KULTULZ ( 7 Years Ago )

Hey Joe D, Any chance of seeing the engine right side? I would like... By KULTULZ ( 7 Years Ago )

Thanks for the help Men! I never have smelled gas like its flooding... By Joe D ( 7 Years Ago )

RE: 292 Y block with dual quad carter carbs stalls when trans is... By Joe D ( 7 Years Ago )

Having trouble ID ing these Carter 4 barrel carbs. No tags and... By Joe D ( 7 Years Ago )

"Having trouble ID ing these Carter 4 barrel carbs. No tags and... By KULTULZ ( 7 Years Ago )

I’m not sure either of these will apply to you, but it’s my experience... By miker ( 7 Years Ago )

[quote][b]KULTULZ (10/26/2018)[/b][hr] "Having trouble ID ing... By Joe D ( 7 Years Ago )

I removed the fine brass screens that were in the carb ports.... By Joe D ( 7 Years Ago )

Ok tonight I drove the truck and it took awhile to make it stall... By Joe D ( 7 Years Ago )

At the minimum, reinstall those screens. You have no particulate... By KULTULZ ( 7 Years Ago )

I did not check spark but it always starts back up. I will pull a plug... By Joe D ( 7 Years Ago )

Oh, I also checked for vacuum leaks around carbs by spraying carbs... By Joe D ( 7 Years Ago )

"I don't have a condenser. I have PerTronix electronic points... By KULTULZ ( 7 Years Ago )

[quote][b]KULTULZ (10/27/2018)[/b][hr] "I don't have a condenser.... By Joe D ( 7 Years Ago )

Just opened this to check on progress ...... there is an ancient... By GREENBIRD56 ( 7 Years Ago )

Joe D. Form the begining when you said you had Carter carbs and... By DryLakesRacer ( 7 Years Ago )

Thanks! I'm going to try the spacers. Kultulz added a link for the... By Joe D ( 7 Years Ago )

Idle is around 1000 rpm, tried different setting with no luck but it... By Joe D ( 7 Years Ago )

"Joe D. Form the begining when you said you had Carter carbs and... By KULTULZ ( 7 Years Ago )

On you tube I've a short video. (Y-Block dual quads) in drive mine... By DryLakesRacer ( 7 Years Ago )

Is your DIST LOM or Dual Advance? If Dual Advance, ported or manifold... By KULTULZ ( 7 Years Ago )

KULTULZ, if your askin me and not JoeD, Mine is a 57-up, I mentioned I... By DryLakesRacer ( 7 Years Ago )

[quote][b]KULTULZ (10/27/2018)[/b][hr] "Joe D. Form the begining... By Joe D ( 7 Years Ago )

"Do you mean that glass fuel bowl looking thing?" No, On the carb... By KULTULZ ( 7 Years Ago )

"Joe D Still trying to imagine how boiling causes flooding. Is it... By KULTULZ ( 7 Years Ago )

DryLakesRacer Posted- "KULTULZ, if your askin me and not JoeD, Mine... By KULTULZ ( 7 Years Ago )

[quote][b]KULTULZ (10/28/2018)[/b][hr] "Joe D Still trying to... By Joe D ( 7 Years Ago )

The factory dual quad setups idled off of both carbs but those carbs... By Ted ( 7 Years Ago )

Wow, you guys have really helped me a lot. I'm learning, Thanks! I... By Joe D ( 7 Years Ago )

[quote][b]Ted (10/28/2018)[/b][hr] The factory dual quad setups... By Joe D ( 7 Years Ago )

JoeD, this may seem a little primative and others will probably chime... By DryLakesRacer ( 7 Years Ago )

[quote][b]DryLakesRacer (10/28/2018)[/b][hr] JoeD, this may seem a... By oldcarmark ( 7 Years Ago )

[quote][b]DryLakesRacer (10/28/2018)[/b][hr] JoeD, this may seem a... By Joe D ( 7 Years Ago )

Or, with the distributor cap off: Load-O-Matic, advance springs... By charliemccraney ( 7 Years Ago )

I think all of this boils down to a mis-match of parts, not know... By KULTULZ ( 7 Years Ago )

PART II The LOM was a system using modulated MANIFOLD VACUUM.... By KULTULZ ( 7 Years Ago )

Ok, I'll find out what parts I have tonight, Distributor type?... By Joe D ( 7 Years Ago )

Joe D Posted- "Ethanol Free gasoline search in Philly area - You... By KULTULZ ( 7 Years Ago )

Manifold 5-13, off of a 57 T-bird According to previous owner. By Joe D ( 7 Years Ago )

Bottom of front carb. Spark Valve? By Joe D ( 7 Years Ago )

If you cannot get the engine to idle down with the idle mixture... By Ted ( 7 Years Ago )

Stock 1960 F-100 MD 292 V-8 Dual Advance Distributor with Pertronix... By Joe D ( 7 Years Ago )

Thanks for the detailed pictures of the front of your carb. Do you... By Ted ( 7 Years Ago )

The only numbers I can find is on the top of each carb, throttle side... By Joe D ( 7 Years Ago )

OK, so now we know it is not LOM. The CARB style points to 1957 MERC... By KULTULZ ( 7 Years Ago )

Charlie McCraney, No reason for the high idle (1000 rpm). I spoke to... By Joe D ( 7 Years Ago )

A lot has been discussed here. Teds response saying both need to be... By DryLakesRacer ( 7 Years Ago )

"Kultulz, When I take the carbs off to install spacers I will have... By KULTULZ ( 7 Years Ago )

Joe- Did this 8V setup come with the truck or you bought the set as a... By KULTULZ ( 7 Years Ago )

I did not put this set up together. I bought the truck 3 1/2 years ago... By Joe D ( 7 Years Ago )

THANX for that! So the truck was bought with the 8V assembled on the... By KULTULZ ( 7 Years Ago )

I did not assemble the engine KultulZ. Issue started this year back in... By Joe D ( 7 Years Ago )

Sounds like they need to be gone through. That's the trouble with... By KULTULZ ( 7 Years Ago )

The distributor vacuum advance is hooked up to a port on the rear... By Joe D ( 7 Years Ago )

Joe, do you open it up every so often? I do about once a month. You... By DryLakesRacer ( 7 Years Ago )

I do open her up often. Today is the third day I drove her into work... By Joe D ( 7 Years Ago )

Don't forget to get back as I wish to know what you finally come... By KULTULZ ( 7 Years Ago )

RE: 292 Y block with dual quad carter carbs stalls when trans is... By Joe D ( 7 Years Ago )

[quote][b]KULTULZ (10/30/2018)[/b][hr] Joe- Did this 8V setup... By Joe D ( 7 Years Ago )

[quote][b]DryLakesRacer (10/30/2018)[/b][hr] A lot has been... By Joe D ( 7 Years Ago )

Well, actually both. You disconnect the linkage(s) and adjust mixture... By KULTULZ ( 7 Years Ago )

Thanks Kultultz! I ordered a uni sync and vacuum gage test kit and... By Joe D ( 7 Years Ago )

Dry and make sure both carb(s) and intake carb pad(s) are clean and... By KULTULZ ( 7 Years Ago )

[quote][b]KULTULZ (11/2/2018)[/b][hr] Dry and make sure both... By Joe D ( 7 Years Ago )

1000rpm idle is pretty high. Unless you have a cam that requires... By charliemccraney ( 7 Years Ago )

Did you ever consider trying a 160 deg, thermostat to see how things... By Sandbird ( 7 Years Ago )

I actually have a 160 degree thermostat and I drilled a 1/8 hole it to... By Joe D ( 7 Years Ago )

RE: 292 Y block with dual quad carter carbs stalls when trans is... By Joe D ( 7 Years Ago )

I removed carbs. Hopefully I can ID to be able to get rebuild kit. Not... By Joe D ( 7 Years Ago )

Also manifold where carbs mount seem nice and flat and true. Gaskets... By Joe D ( 7 Years Ago )

[quote][b]Joe D (11/5/2018)[/b][hr] I removed carbs. Hopefully I... By KULTULZ ( 7 Years Ago )

KultulZ I gave up on ID ing the carbs and finding the right kits for... By Joe D ( 7 Years Ago )

COPY! By KULTULZ ( 7 Years Ago )

Well I got the carbs back reinstalled and test drove. Still stalling... By Joe D ( 7 Years Ago )

... ain't this a b!tch ... Wherever you sent the carbs, was he able... By KULTULZ ( 7 Years Ago )

Every time I read your entries, I come back to the idea that happened... By Joe-JDC ( 7 Years Ago )

[quote]Every time I read your entries, I come back to the idea that... By KULTULZ ( 7 Years Ago )

Kultulz, The guy who rebuilt the carbs was not interested in trying... By Joe D ( 7 Years Ago )

Kultulz, I did insulate the fuel lines running up to the carbs since... By Joe D ( 7 Years Ago )

If you are driving with the rear carb only off idle, and then the... By Joe-JDC ( 7 Years Ago )

JDC, Both carbs are supplying idle fuel now and as of yesterday... By Joe D ( 7 Years Ago )

[quote]The guy who rebuilt the carbs was not interested in trying to... By KULTULZ ( 7 Years Ago )

OH! I see an EDEL fuel pump on yours. Test the fuel pressure. It... By KULTULZ ( 7 Years Ago )

Kultulz, I didn't realize carbs were calibrated when they were... By Joe D ( 7 Years Ago )

[quote][b]Joe D (12/19/2018)[/b][hr] Kultulz, I didn't realize... By Joe D ( 7 Years Ago )

RE: 292 Y block with dual quad carter carbs stalls when trans is... By Joe D ( 7 Years Ago )

[quote]Mix screws backed out two turns. tried to adjust but really... By KULTULZ ( 7 Years Ago )

Kultultz, When on the highway and coming to a light or exit and trans... By Joe D ( 7 Years Ago )

Oh one more thing! I hooked up a clear fuel filter at the inlet of the... By Joe D ( 7 Years Ago )

[quote]Distributor vacuum advance is hooked up to the rear carb... By KULTULZ ( 7 Years Ago )

RE: 292 Y block with dual quad carter carbs stalls when trans is... By KULTULZ ( 7 Years Ago )

Sorry about the multiple posts but I have difficulty with this forum... By KULTULZ ( 7 Years Ago )

Kultultz, The vacuum line from the distributor is hook up to the rear... By Joe D ( 7 Years Ago )

Distributor vacuum advance chamber working? By Ted ( 7 Years Ago )

[quote]... a friend of mine has a computer box that runs the engine... By KULTULZ ( 7 Years Ago )

Ted, I had the cap off and pulled a vacuum by sucking on the hose... By Joe D ( 7 Years Ago )

By any chance has anyone installed a PCV system on your engine? The... By Sandbird ( 7 Years Ago )

[quote]Sandberg Posted- By any chance has anyone installed a PCV... By KULTULZ ( 7 Years Ago )

[quote]The vacuum line from the distributor is hook up to the rear... By KULTULZ ( 7 Years Ago )

Awful big hole for distributor vacuum. The original e setup took... By Sandbird ( 7 Years Ago )

[quote]Awful big hole for distributor vacuum. The original e setup... By KULTULZ ( 7 Years Ago )

Here is a thread discussing how gasoline was filtered before the inlet... By KULTULZ ( 7 Years Ago )

KultulZ and Sandbird, The computer box I mentioned was not a computer... By Joe D ( 6 Years Ago )

Where does the hose on the back of the manifold go? By charliemccraney ( 6 Years Ago )

The hole seems to be the one you speak of with the white cap. To add... By Sandbird ( 6 Years Ago )

“There is no PCV system on the engine, just a breather cap and hose on... By miker ( 6 Years Ago )

The hole in the manifold (rear carb location) has a fitting that is... By Joe D ( 6 Years Ago )

RE: 292 Y block with dual quad carter carbs stalls when trans is... By Joe D ( 6 Years Ago )

I replaced the intake manifold gaskets the other day because of the... By Joe D ( 6 Years Ago )

The temperatures do indicate a problem. They don't necessarily mean... By charliemccraney ( 6 Years Ago )

Thanks Charlie, I agree! The manifold port in the picture on page 10... By Joe D ( 6 Years Ago )

14" manifold vacuum seems kind of low. Did you ever do a compression... By Sandbird ( 6 Years Ago )

The timing is advanced to 28 degrees. This seems to be the sweet spot... By Joe D ( 6 Years Ago )

Wow 28 deg's is a lot of initial advance. I would think a bad valve... By Sandbird ( 6 Years Ago )

Sandbird, The bolts went in fine and I cleaned up all the surfaces for... By Joe D ( 6 Years Ago )

[quote]The timing is advanced to 28 degrees. This seems to be the... By KULTULZ ( 6 Years Ago )

[quote][b]Joe D (1/3/2019)[/b][hr]The timing is advanced to 28... By Ted ( 6 Years Ago )

[quote] When I see initial timing degrees set that high, I question... By KULTULZ ( 6 Years Ago )

Since my WCFB set up is the other one in photos and there are... By DryLakesRacer ( 6 Years Ago )

OK, this was an earlier post- No date recorded as per format.... By KULTULZ ( 6 Years Ago )

You may be losing some vacuum through your unused choke thermostat... By Sandbird ( 6 Years Ago )

Kultulz, The timing is 28 BTDC with vac adv hooked up to rear carb... By Joe D ( 6 Years Ago )

Joe D, I realize that wasn't your engine, Page 10 has a picture of... By Sandbird ( 6 Years Ago )

A high idle that cannot seem to be solved is not running fine. There... By charliemccraney ( 6 Years Ago )

[QUOTE]Kultulz, The timing is 28 BTDC with vac adv hooked up to rear... By KULTULZ ( 6 Years Ago )

Thanks Y Blockers!! We will correct this issue soon! A friend of mine... By Joe D ( 6 Years Ago )

[quote]Anyone out there know someone who can calibrate these Carter... By KULTULZ ( 6 Years Ago )

[quote]I do not understand what you are saying about the crankcase... By KULTULZ ( 6 Years Ago )

Kultutz, I'm going to remove the carbs and manifold this weekend and... By Joe D ( 6 Years Ago )

If he used the word believe, then you don't really have any idea what... By charliemccraney ( 6 Years Ago )

Charlie, I should have said that as far as the engine goes, when I... By Joe D ( 6 Years Ago )

As for WCFB tuning. I found both the 53 Cadillac and the 53 Oldsmobile... By DryLakesRacer ( 6 Years Ago )

Thanks DryLakesRacer! Someone earlier I this conversation had said it... By Joe D ( 6 Years Ago )

It shouldn't vibrate at speed. That will be a mystery to solve once... By charliemccraney ( 6 Years Ago )

Not only do dual quads sound cool but they look cool too!! By Joe D ( 6 Years Ago )

To most this is probably unheard of after doing the work of add dual... By DryLakesRacer ( 6 Years Ago )

Removed the Edel manifold and dual quads. Also removed the valley... By Joe D ( 6 Years Ago )

Test fit stock manifold. By Joe D ( 6 Years Ago )

Work update: Removed Edel manifold and dual quad Carters. Removed... By Joe D ( 6 Years Ago )

[quote]Removed Edel manifold and dual quad Carters. [/quote] You... By KULTULZ ( 6 Years Ago )

I test fitted the stock manifold. it was hitting the oil fill/... By Joe D ( 6 Years Ago )

[quote]I test fitted the stock manifold. it was hitting the oil fill/... By KULTULZ ( 6 Years Ago )

I’m in agreement with you in putting a single four intake on the... By Ted ( 6 Years Ago )

Ted, I'm getting an adaptor to try a Edelbrock or Holly carb. that I... By Joe D ( 6 Years Ago )

Joe D I don't know if it's been mentioned yet, but I just remembered... By Sandbird ( 6 Years Ago )

[quote]I don't know if it's been mentioned yet, but I just remembered... By KULTULZ ( 6 Years Ago )

Ok Y blockers, I installed a manifold (1957 I was told above), carb... By Joe D ( 6 Years Ago )

The iron manifold you have provided pictures of is not 1957. I don't... By charliemccraney ( 6 Years Ago )

Thanks Charlie! Someone had said it was a 1957 E code manifold.... By Joe D ( 6 Years Ago )

[quote][b]Joe D (1/18/2019)[/b][hr]Thanks Charlie! Someone had said it... By Ted ( 6 Years Ago )

E-code is 2x4s. A '57 single 4 does not require an adapter for a... By charliemccraney ( 6 Years Ago )

Thanks Ted! Here it is. My buddy at work did a great job bead... By Joe D ( 6 Years Ago )

... woo ...... By KULTULZ ( 6 Years Ago )

hello! we had a similar problem with a friends e-bird that I rebuilt!... By yalincoln ( 6 Years Ago )

yalincoln, Thanks sharing your story. I installed a single carb... By Joe D ( 6 Years Ago )

Well Y blockers here it is.... I test drove the truck yesterday and it... By Joe D ( 6 Years Ago )

Temporary fuel line set up: Valve with clear tube to a bottle,... By Joe D ( 6 Years Ago )

[quote]Manifold Vacuum reading is ... [b][u]10.5"Hg[/u][/b]. After... By KULTULZ ( 6 Years Ago )

Kultulz, I did locate TDC with my neighbor's finger in #1 cylinder and... By Joe D ( 6 Years Ago )

Watch This - https://www.youtube.com/watch?v=RENhHI9n65I Trying to... By KULTULZ ( 6 Years Ago )

TOP TIER GASOLINE - https://www.toptiergas.com/ Bargain branded... By KULTULZ ( 6 Years Ago )

Kultultz, Thanks for the video and the Top Tier links! The Sunoco fuel... By Joe D ( 6 Years Ago )

[quote]I did run a hose out the front of the truck with a gage... By KULTULZ ( 6 Years Ago )

Y-Blockers, I have not had the time to work much on this ongoing... By Joe D ( 6 Years Ago )

Is your gas tank vented? Do you have a vented cap, or a line to... By Joe-JDC ( 6 Years Ago )

Joe JDC, Gas tank has a vent and cap is not vented. I drove truck... By Joe D ( 6 Years Ago )

I have been following this Post. Very frustrating for sure. I don't... By oldcarmark ( 6 Years Ago )

Then you have a wire that is grounding out the ignition when the... By Joe-JDC ( 6 Years Ago )

oldcarmark, I did try a new coil with no luck and I also disconnected... By Joe D ( 6 Years Ago )

Joe I have One more Suggestion to try. I was doing some reading online... By oldcarmark ( 6 Years Ago )

oldcarmark, Hey its worth a try! How would I test to see if this is... By Joe D ( 6 Years Ago )

Yes or try another Solenoid. If You take it off and go for a Drive and... By oldcarmark ( 6 Years Ago )

Do you have a automatic trans neutral switch? I had a original s/w,... By Rudder2fly ( 6 Years Ago )

Gene, My 1960 F-100 PU has a manual trans. "3 on the tree". I haven't... By Joe D ( 6 Years Ago )

Well here it is Y Blockers - I Test drove the truck yesterday and it... By Joe D ( 6 Years Ago )

CONGRATULATIONS! So the valve adj was so far off it held poor engine... By KULTULZ ( 6 Years Ago )

Kultultz, Thanks! I have some questions from your post. How do I... By Joe D ( 6 Years Ago )

You can alter the valve lash by a couple thousandths in either... By charliemccraney ( 6 Years Ago )

Thanks Charlie! The link did not work for valve adjustment but I will... By Joe D ( 6 Years Ago )

[quote][b]Joe D (2/25/2019)[/b][hr]Thanks Charlie! The link did not... By Ted ( 6 Years Ago )

Weird, it worked when I originally posted the link. It's fixed now,... By charliemccraney ( 6 Years Ago )

Ok, it worked. I was worried at first reading this method that it was... By Joe D ( 6 Years Ago )

It shouldn't be causing a problem as long as the perimeter is sealing... By charliemccraney ( 6 Years Ago )

Ok Y blockers here is another update: Truck is running good except on... By Joe D ( 6 Years Ago )

It is an eccentric which is bolted on the front of the cam with the... By charliemccraney ( 6 Years Ago )

Here’s a picture of the eccentric.... By pintoplumber ( 6 Years Ago )

Thanks for the info and the photo! Very helpful! It's always hard to... By Joe D ( 6 Years Ago )

You can rule out the fuel pump arm not being on the cam mounted... By Ted ( 6 Years Ago )

Thanks Ted! I just adjusted the choke. The choke plate was not closed.... By Joe D ( 6 Years Ago )

Your Edelbrock doesn't have a power valve but it does have metering... By charliemccraney ( 6 Years Ago )

Thanks Charlie, you da man! By Joe D ( 6 Years Ago )

OK Y guys, truck is running good but I think it can run even better.... By Joe D ( 6 Years Ago )

Post Reply

Reading This Topic