1955 heads

Posted By Brent 7 Years Ago

You don't have permission to rate!

Author	Message
Brent	Posted 7 Years Ago
Supercharged Group: Forum Members Last Active: 6 Months Ago Posts: 142, Visits: 1.5K	I have a single head marked ECK-C on the outside and ECK-B on the bottom. John's Head chart indicates the CR is slightly different.. How can I determine which marking is correct (The ECK-C or the B) Does the Compression Ratio translate to the CC size? If so, how is the CC measured? If one ECK-B and one ECK-C were installed together on a 292, would the 5% CR difference cause an imbalance? .150 Stroked Y-Block:327.25 ci @ >1hp per ci
	Reply Quote

Threaded View

1955 heads By Brent ( 7 Years Ago )

i put these very 2 heads on a 292 years ago.i didnt know they were... By darrell ( 7 Years Ago )

KULTULZ I have not been able to crack the date coding. Can you... By Brent ( 7 Years Ago )

Brent Posted- KULTULZ I have not been able to crack the date... By KULTULZ ( 7 Years Ago )

Thank You KULTULZ The engine that I recently acquired has heads... By Brent ( 7 Years Ago )

Brent Posted- "The engine that I recently acquired has heads that... By KULTULZ ( 7 Years Ago )

The error that I speak of is: This ECK-B block has one ECK-B and one... By Brent ( 7 Years Ago )

Yes. What a bummer. I am now searching for an ECK-C to match the (5 1... By Brent ( 7 Years Ago )

Now that is going to be an exercise. Most will not understand DATE... By KULTULZ ( 7 Years Ago )