I wanted to make sure it would work with a Petronics

         deal.                        THx Bill

Bill

Pelham,Al

It simply has a "spacer" that clips on with the original distributor clips and has its own clips to hold on the larger cap. There is a Ford motorsports part number for all three parts or you could get them piecemeal at the auto parts palace of your chioce.

The clearance of the big HEI cap is as shown here......

This cap won't clear the bolt and bracket for the "standard" plug wire guide that fits on the RH rear of the cylinder head - so the threaded hole has been "plugged" with a short socket head setscrew and sealant.

I've been using the Ford "TFI" type coils and bracketing them right onto the original "Y" manifold bosses.   

 
 Steve Metzger       Tucson, Arizona

          several great idea's and I have a question about one of them.

          He talks about using a kit from Jeg's to adapt the larger dist cap

          to a Y-distributor. Will this work with a dist from a '60 292,

          and will it work with a Petronics or Accel module, and last, will

          it "clear" everything ok?    Different rotor?

                                       Just a "Dummy" askin'

                                                 Bill

Bill

Pelham,Al