No offers from a previous ad and too good to throw out!  Pay for shipping and its yours.

292 Pistons w rings and pins   Set of 8   measure 3.748" dia across skirt   "TRW L3040 STD" stamped on top -set was balanced @ 695  FREE + SHIPPING

ISKY Camshaft  #301300   FREE + SHIPPING  (Check Isky website for specs.)

(Above were removed from a bored 292 with about 3000 miles)

ALSO HAVE FOR SALE

Exhaust Manifolds (Pairs only) $50

55 T-Bird tack drive distributors  Dual point $275  Single point $250

(prices do not include shipping!)

PLEASE REQUEST INFO AND PICTURES DIRECTLY   not4winter@yahoo.com

Isky cam is gone - still have pistons as of 7/10.  Thanks for all the inquiries.  J

I only have one good pair left and another pair with a repairable break on the passenger side.  Please reply directly to the e-mail address given in original ad and I will gladly send pictures for your consideration.  Thank you.  J   not4winter@yahoo.com

Joe,



Got no replies from my direct e-mail inquiries. You still have the T-Bird distributors?

6 VOLTS/POS. GRD. NW INDIANA

I only have 55 distributors left.   No inquiry from you was received. I just sent myself a test message by clicking on the link in the post and it was successful immediately.  Please try again and I will send info and pictures.  Thank you.  J

Joe,



Clicked on your link again, but if you did not get the other e-mails, I'm not optimistic (maybe your spam filter is set too high?).



Send photos/info re: 55 distributors to: dantinh62@kconline.com

6 VOLTS/POS. GRD. NW INDIANA

Info has been sent to address provided.  Thank you for your interest.  Spam settings are getting changed.   J

Joe,

Can I have any lifters you have please?

My camshaft wore a lobe out, and the lifter is damaged too. I only need the one, but a whole set would be perfect. Im in England.

  Picture taken in 1960. Funnily enough it still looks like this!

1959 Mercury Monterey 312 Y Block.   NORFOLK, ENGLAND, UK.

Paul, I know there is a tendancy to save money on things like cams and lifters but you would be smart to avoid it. I've found that scrimping on some parts only costs you more in the long run. There are some new lifters on the market that are pure trash(poor hardening). I suggest you call John Mummert and get a price for a new set of his lifters and consider a warmed up cam from him at the same time. His web site is: http://www.ford-y-block.com/ John will not steer you wrong! Chuck in NH

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

I appreciate the advice Chuck.

Sadly everything comes down to price. I'm only a poor bus driver.

I don't want a warmed up cam as performance is not what I'm looking for. Reliability is all I want. I drive my Mercury to shows and generally like an old lady around local roads etc. I dont intend to blast along.

The lifters without cam ($219) or with ($189) are too expensive for me right now. Especially considering postage to me in the UK is not cheap either. My current lifters are in good condition except one. If I can get hold of one good one from somewhere, that would be great.

  Picture taken in 1960. Funnily enough it still looks like this!

1959 Mercury Monterey 312 Y Block.   NORFOLK, ENGLAND, UK.