• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• Main Bearing Caps

Main Bearing Caps

Posted By 55 GLASS TOP 6 Years Ago

You don't have permission to rate!

Post Reply

Main Bearing Caps

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
55 GLASS TOP	Posted 6 Years Ago
Supercharged Group: Forum Members Last Active: 2 Years Ago Posts: 389, Visits: 31.8K	Just a quick question ,when I removed the pan from my 292 engine I noticed all the bolts holding down the bearing caps had lock washers except the last cap near the rear of the engine.
	Reply Quote

Threaded View

Threaded View

Main Bearing Caps By 55 GLASS TOP ( 6 Years Ago ) Strange. I have disassembled dozens of Yblocks over the years. I... By Florida_Phil ( 6 Years Ago ) I had the tin washers on the rod bolts four out of the five caps had... By 55 GLASS TOP ( 6 Years Ago ) The Parts Catalog is ambiguous regarding Main Cap Bolts and Lock... By oldcarmark ( 6 Years Ago ) If you go to eBay and run ford 292 main bearing caps you will see the... By 55 GLASS TOP ( 6 Years Ago ) Maybe the Bolts listed in Catalog are replacement Parts for the Ones... By oldcarmark ( 6 Years Ago ) I think the rear cap bolts have no washers because washers would make... By Hoosier Hurricane ( 6 Years Ago ) RE: Main Bearing Caps By KULTULZ ( 6 Years Ago ) That Parts Book lists 2 different Bolts, One requires Washers in 8... By oldcarmark ( 6 Years Ago ) Check your CAN ISSUE under BPN 6345 and see what it says for up north.... By KULTULZ ( 6 Years Ago ) HAVE dismantled and assembled many ys several 312s probably 20 292s... By 2721955meteor ( 6 Years Ago ) all the early blocks to 58 had lock washers on the first 4 as john... By darrell ( 6 Years Ago ) had the exact same thing on my block.when i sent it away for line... By blocky ( 6 Years Ago )

Post Reply

Back To Top

Reading This Topic